Post this discussion mail to kernel mail list, since last mail is rejected due to incorrect format, sorry for confusion.
Best Regards! Anson Huang > -----Original Message----- > From: Fabio Estevam [mailto:[email protected]] > Sent: 2018-01-02 11:32 PM > To: Anson Huang <[email protected]> > Cc: moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE <linux- > [email protected]>; open list:OPEN FIRMWARE AND FLATTENED > DEVICE TREE BINDINGS <[email protected]>; linux- > [email protected]; linux-kernel <[email protected]>; Mark > Rutland <[email protected]>; A.s. Dong <[email protected]>; Jacky > Bai <[email protected]>; viresh kumar <[email protected]>; > [email protected]; Russell King - ARM Linux <[email protected]>; Rob > Herring <[email protected]>; Sascha Hauer <[email protected]>; > Fabio Estevam <[email protected]>; Shawn Guo > <[email protected]> > Subject: Re: [PATCH 1/2] ARM: dts: imx6ul: add 696MHz operating point > > On Tue, Jan 2, 2018 at 1:12 PM, Anson Huang <[email protected]> wrote: > > > There is a comment in VDD_ARM, VDD_SOC must NOT lower than VDD_ARM. > > > > Output voltage must be set to the following rules: > > • VDD_ARM_CAP <= VDD_SOC_CAP > > • VDD_SOC_CAP - VDD_ARM_CAP < 330 mV > > Thanks for the clarifcation. > > Reviewed-by: Fabio Estevam <[email protected]>
