On Tuesday 02 January 2018 08:40 PM, Adam Ford wrote: > On Sun, Dec 31, 2017 at 5:39 PM, David Lechner <da...@lechnology.com> wrote: >> This series converts macreqh-davinci to use the common clock framework. >> >> Basically, this series does some cleanup and rearranging to get things >> ready for the conversion. Then there is a patch to add new driver in >> drivers/clk and finally a patch to make the conversion from the mach >> clock drivers to the new drivers. >> >> I have tested this on LEGO MINDSTORMS EV3 (TI AM1808), so I am confident >> that I haven't broken anything (too badly) in da850. But, I don't have >> other hardware to test. > > I tested this on a DA850-EVM, but I was not able to successfully get it to > boot. > > It hangs during boot with no errors, oops's, or panics, but the > standard 4.15.0-rc5 from linux-stable booted just fine. > > Maybe one of the TI guys will have some suggestions, but as-is, it > appears to break at least the DA850-evm.
I haven't gotten to looking into this series yet. Should happen by Friday this week. >> The one thing that I know I have broken is CPU frequency scaling on da850. >> I don't think it was working with device tree anyway, so I can't really test >> it with the hardware I have. I'm hoping that it will be OK to defer fixing >> it and add device tree support at the same time. >> > > I agree with you that it's broken in the device tree, but I don't > think it ever worked. It was working with legacy board file method. Its not supported with DT, yes. Most probably, the generic cpufreq-dt support needs to be used for the DT case. Thanks, Sekhar