On 2018/1/4 1:32, Jeremy Linton wrote: > Hi, > > On 01/03/2018 08:29 AM, Sudeep Holla wrote: >> >> On 02/01/18 02:29, Xiongfeng Wang wrote: >>> Hi, >>> >>> On 2017/12/18 20:42, Morten Rasmussen wrote: >>>> On Fri, Dec 15, 2017 at 10:36:35AM -0600, Jeremy Linton wrote: >>>>> Hi, >>>>> >>>>> On 12/13/2017 12:02 PM, Lorenzo Pieralisi wrote: >>>>>> [+Morten, Dietmar] >>>>>> >>>>>> $SUBJECT should be: >>>>>> >>>>>> arm64: topology: rename cluster_id >>>>> >>> [cut] >>>>> >>> I think we still need the information describing which cores are in one >>> cluster. Many arm64 chips have the architecture core/cluster/socket. Cores >>> in one cluster may share a same L2 cache. That information can be used to >>> build the sched_domain. If we put cores in one cluster in one sched_domain, >>> the performance will be better.(please see kernel/sched/topology.c:1197, >>> cpu_coregroup_mask() uses 'core_sibling' to build a multi-core >>> sched_domain). >> >> We get all the cache information from DT/ACPI PPTT(mainly topology) and now >> even the geometry. So ideally, the sharing information must come from that. >> Any other solution might end up in conflict if DT/PPTT and that mismatch. >> >>> So I think we still need variable to record which cores are in one >>> sched_domain for future use. >> >> I tend to say no, at-least not as is. >> > > Well, either way, with DynamiQ (and a55/a75) the cores have private L2's, > which means that the cluster sharing is happening at what is then the L3 > level. So, the code I had in earlier versions would have needed tweaks to > deal with that anyway. > > IMHO, if we want to detect this kind of sharing for future scheduling > domains, it should probably be done independent of PPTT/DT/MIPDR by picking > out shared cache levels from struct cacheinfo *. Which makes that change > unrelated to the basic population of cacheinfo and cpu_topology in this > patchset. > I think we need to build scheduling domains not only on the cache-sharing information, but also some other information, such as which cores use the same cache coherent interconnect (I don't know the detail, I just guess)
I think PPTT is used to report the cores topology, which cores are more related to each other. They may share the same cache, or use the same CCI, or are physically near to each other. I think we should use this information to build MC(multi-cores) scheduling domains. Or maybe we can just discard the MC scheduling domain and handle this scheduling-domain-building task to the NUMA subsystem entirely, I don't know if it is proper. Thanks, Xiongfeng > > . >
