Hello Johnatan,
May be the issue is the same as Javier Martinez Canillas wrote:
"What is not correct is to require OF-only drivers to have an I2C
device ID table just as a workaround to have their modules
auto-loading working."
Please see: http://lkml.iu.edu/hypermail/linux/kernel/1712.0/01779.html
So the problem is not in driver, but in auto-loading procedure.
Thank you!
Kind regards,
Dmitry
>>> >> >> >> > Signed-off-by: Dmitry Mastykin <masti...@gmail.com>
>>> >> >> >> > ---
>>> >> >> >> > drivers/iio/adc/max9611.c | 5 ++---
>>> >> >> >> > 1 file changed, 2 insertions(+), 3 deletions(-)
>>> >> >> >> >
>>> >> >> >> > diff --git a/drivers/iio/adc/max9611.c
>>> >> >> >> > b/drivers/iio/adc/max9611.c
>>> >> >> >> > index b1dd17c..ce0115a 100644
>>> >> >> >> > --- a/drivers/iio/adc/max9611.c
>>> >> >> >> > +++ b/drivers/iio/adc/max9611.c
>>> >> >> >> > @@ -523,8 +523,7 @@ static const struct of_device_id
>>> >> >> >> > max9611_of_table[] = {
>>> >> >> >> > };
>>> >> >> >> >
>>> >> >> >> > MODULE_DEVICE_TABLE(of, max9611_of_table);
>>> >> >> >> > -static int max9611_probe(struct i2c_client *client,
>>> >> >> >> > - const struct i2c_device_id *id)
>>> >> >> >> > +static int max9611_probe(struct i2c_client *client)
>>> >> >> >> > {
>>> >> >> >> > const char * const shunt_res_prop =
>>> >> >> >> > "shunt-resistor-micro-ohms";
>>> >> >> >> > const struct device_node *of_node = client->dev.of_node;
>>> >> >> >> > @@ -576,7 +575,7 @@ static struct i2c_driver max9611_driver = {
>>> >> >> >> > .owner = THIS_MODULE,
>>> >> >> >> > .of_match_table = max9611_of_table,
>>> >> >> >> > },
>>> >> >> >> > - .probe = max9611_probe,
>>> >> >> >> > + .probe_new = max9611_probe,
>>> >> >> >> > };
>>> >> >> >> > module_i2c_driver(max9611_driver);
>>> >> >> >> >
>>> >> >> >> > --
>>> >> >> >> > 2.7.4
>>> >> >> >> >
>>> >> >
>>> >
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
>>> the body of a message to majord...@vger.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
