Hi Philippe, Thanks for the review. Will fix all SPDX tags in next version.
Thanks, Jolly Shah > -----Original Message----- > From: Philippe Ombredanne [mailto:pombreda...@nexb.com] > Sent: Tuesday, January 09, 2018 4:53 AM > To: Jolly Shah <jol...@xilinx.com> > Cc: Michael Turquette <mturque...@baylibre.com>; Stephen Boyd > <sb...@codeaurora.org>; Michal Simek <michal.si...@xilinx.com>; linux- > c...@vger.kernel.org; moderated list:ARM/FREESCALE IMX / MXC ARM > ARCHITECTURE <linux-arm-ker...@lists.infradead.org>; LKML <linux- > ker...@vger.kernel.org>; Jolly Shah <jol...@xilinx.com>; Rajan Vaja > <raj...@xilinx.com>; Tejas Patel <tej...@xilinx.com>; Shubhrajyoti Datta > <shubh...@xilinx.com> > Subject: Re: [RFC PATCH 2/2] drivers: clk: Add ZynqMP clock driver > > Jolly, > > On Mon, Jan 8, 2018 at 11:16 PM, Jolly Shah <jolly.s...@xilinx.com> wrote: > > This patch adds CCF compliant clock driver for ZynqMP. > > Clock driver queries supported clock information from > > firmware and regiters pll and output clocks with CCF. > > > > Signed-off-by: Jolly Shah <jol...@xilinx.com> > > Signed-off-by: Rajan Vaja <raj...@xilinx.com> > > Signed-off-by: Tejas Patel <tej...@xilinx.com> > > Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.da...@xilinx.com> > > --- > > <snip> > > > > .../devicetree/bindings/clock/zynq_mpsoc.txt | 163 +++++ > > drivers/clk/Kconfig | 1 + > > drivers/clk/Makefile | 1 + > > drivers/clk/zynqmp/Kconfig | 8 + > > drivers/clk/zynqmp/Makefile | 3 + > > drivers/clk/zynqmp/clk-gate-zynqmp.c | 158 +++++ > > drivers/clk/zynqmp/clk-mux-zynqmp.c | 190 ++++++ > > drivers/clk/zynqmp/clkc.c | 707 > > +++++++++++++++++++++ > > drivers/clk/zynqmp/divider.c | 239 +++++++ > > drivers/clk/zynqmp/pll.c | 384 +++++++++++ > > include/linux/clk/zynqmp.h | 46 ++ > > 11 files changed, 1900 insertions(+) > > create mode 100644 > Documentation/devicetree/bindings/clock/zynq_mpsoc.txt > > create mode 100644 drivers/clk/zynqmp/Kconfig > > create mode 100644 drivers/clk/zynqmp/Makefile > > create mode 100644 drivers/clk/zynqmp/clk-gate-zynqmp.c > > create mode 100644 drivers/clk/zynqmp/clk-mux-zynqmp.c > > create mode 100644 drivers/clk/zynqmp/clkc.c > > create mode 100644 drivers/clk/zynqmp/divider.c > > create mode 100644 drivers/clk/zynqmp/pll.c > > create mode 100644 include/linux/clk/zynqmp.h > >
