On Thu 2007-05-17 15:08:39, Len Brown wrote:
> On Thursday 17 May 2007 09:36, Maciej Rutecki wrote:
>
> > Many people need change trippoints, for example I have:
> >
> > cat /proc/acpi/thermal_zone/TZ0/trip_points | grep critical
> > critical (S5): 256 C
> >
> > I _must_ change it to below 105 C, or edit DSDT table (too difficult to
> > me). I cannot use this kernel, when trip points are read only.
>
> What bad things happen if you leave the critical trip point at 256?
> Do you find that you can drive the temperature over 105 and
> the system fails to shut down?
Something similar happened to me on XE3, yes.
(Actual values were different; BIOS specified critical temperature at
cca 95C, but hw killed the power at cca 83C. Setting critical trip
point at 80C made the problem go away.)
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
