On 01/16/2018 06:21 AM, Adam Ford wrote:
On Tue, Jan 16, 2018 at 5:22 AM, Sekhar Nori <nsek...@ti.com> wrote:
Hi Adam, David,
On Friday 12 January 2018 03:04 AM, Adam Ford wrote:
Thanks for clarifying. I was able to make it work with the following patch:
diff --git a/drivers/clk/davinci/psc-da850.c b/drivers/clk/davinci/psc-da850.c
index 3b4583d..a76b8682 100644
--- a/drivers/clk/davinci/psc-da850.c
+++ b/drivers/clk/davinci/psc-da850.c
@@ -25,7 +25,7 @@ static const struct davinci_psc_clk_info
da850_psc0_info[] __initconst = {
LPSC(9, 0, uart0, pll0_sysclk2, 0),
LPSC(13, 0, pruss, pll0_sysclk2, 0),
LPSC(14, 0, arm, pll0_sysclk6, LPSC_ALWAYS_ENABLED),
- LPSC(15, 1, dsp, pll0_sysclk1, LPSC_FORCE | LPSC_LOCAL_RESET),
+ LPSC(15, 1, dsp, pll0_sysclk1, LPSC_FORCE | LPSC_LOCAL_RESET |
LPSC_ALWAYS_ENABLED),
Keeping the DSP clock always enabled was not needed earlier AFAICS, so
this needs to be investigated.
I was testing the DA850-evm and found it was required or the DA850
wouldn't boot. I don't know enough of why to explain it. I went
through all the clocks as suggested by David, and this one-line patch
fixed the hanging problem I had. Without it the AM1808 board I have
won't boot.
That's interesting because 1) the AM1808 does not have a DSP and 2) I
am using an AM1808 based system as well that boots without having this
always enabled (AM1808BZWT4 to be exact).
I guess I will leave this change out of the next revision so that we
don't forget that this needs to be addressed. Sekhar found a bug in
the new PSC driver with the LPSC_FORCE bit, so maybe that could be
the difference.
Adam, before the changes in this series, did you have
CONFIG_DAVINCI_RESET_CLOCKS=y in your config?
