Hi Benjamin, Just remove the extra blanck line.
Otherwise you can addmy Acked-by: Gabriel Fernandez <gabriel.fernan...@st.com> Best regards Gabriel On 01/15/2018 03:21 PM, Benjamin Gaignard wrote: > Add two configuration flags to be able to not compile all the time > stm32f and stm32h7 drivers when ARCH_STM32 is set. > That help to save some space on those small platforms. > > Signed-off-by: Benjamin Gaignard <benjamin.gaign...@st.com> > --- > drivers/clk/Kconfig | 15 +++++++++++++++ > drivers/clk/Makefile | 4 ++-- > 2 files changed, 17 insertions(+), 2 deletions(-) > > diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig > index 1c4e1aa6767e..c876eb828fc4 100644 > --- a/drivers/clk/Kconfig > +++ b/drivers/clk/Kconfig > @@ -226,6 +226,21 @@ config COMMON_CLK_VC5 > This driver supports the IDT VersaClock 5 and VersaClock 6 > programmable clock generators. > > +config COMMON_CLK_STM32F > + bool "Clock driver for stm32f4 and stm32f7 SoC families" > + depends on MACH_STM32F429 || MACH_STM32F469 || MACH_STM32F746 > + help > + ---help--- > + Support for stm32f4 and stm32f7 SoC families clocks > + > +config COMMON_CLK_STM32H7 > + bool "Clock driver for stm32h7 SoC family" > + depends on MACH_STM32H743 > + help > + ---help--- > + Support for stm32h7 SoC family clocks > + > + Removeextrablankline > source "drivers/clk/bcm/Kconfig" > source "drivers/clk/hisilicon/Kconfig" > source "drivers/clk/imgtec/Kconfig" > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile > index f7f761b02bed..4a8e063a7159 100644 > --- a/drivers/clk/Makefile > +++ b/drivers/clk/Makefile > @@ -44,8 +44,8 @@ obj-$(CONFIG_COMMON_CLK_SCPI) += clk-scpi.o > obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o > obj-$(CONFIG_COMMON_CLK_SI514) += clk-si514.o > obj-$(CONFIG_COMMON_CLK_SI570) += clk-si570.o > -obj-$(CONFIG_ARCH_STM32) += clk-stm32f4.o > -obj-$(CONFIG_ARCH_STM32) += clk-stm32h7.o > +obj-$(CONFIG_COMMON_CLK_STM32F) += clk-stm32f4.o > +obj-$(CONFIG_COMMON_CLK_STM32H7) += clk-stm32h7.o > obj-$(CONFIG_ARCH_TANGO) += clk-tango4.o > obj-$(CONFIG_CLK_TWL6040) += clk-twl6040.o > obj-$(CONFIG_ARCH_U300) += clk-u300.o