[PATCH 2/5] arm: zynq: Add support for Xilinx zc770 xm010 dc1 board

[Michal Simek]

zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains ethernet port, can, i2c, sd, qspi, spi, uart and usb.

Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---

 arch/arm/boot/dts/Makefile             |  1 +
 arch/arm/boot/dts/zynq-zc770-xm010.dts | 92 ++++++++++++++++++++++++++++++++++
 2 files changed, 93 insertions(+)
 create mode 100644 arch/arm/boot/dts/zynq-zc770-xm010.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 679cd258bc1f..fa62546ebfb3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1041,6 +1041,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
        zynq-parallella.dtb \
        zynq-zc702.dtb \
        zynq-zc706.dtb \
+       zynq-zc770-xm010.dtb \
        zynq-zed.dtb \
        zynq-zybo.dtb
 dtb-$(CONFIG_MACH_ARMADA_370) += \
diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts 
b/arch/arm/boot/dts/zynq-zc770-xm010.dts
new file mode 100644
index 000000000000..b1cfb4ede434
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zc770-xm010.dts
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM010 board DTS
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+       compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
+       model = "Xilinx Zynq";
+
+       aliases {
+               ethernet0 = &gem0;
+               i2c0 = &i2c0;
+               serial0 = &uart1;
+               spi1 = &spi1;
+       };
+
+       chosen {
+               bootargs = "";
+               stdout-path = "serial0:115200n8";
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x40000000>;
+       };
+
+       usb_phy0: phy0 {
+               compatible = "usb-nop-xceiv";
+               #phy-cells = <0>;
+       };
+};
+
+&can0 {
+       status = "okay";
+};
+
+&gem0 {
+       status = "okay";
+       phy-mode = "rgmii-id";
+       phy-handle = <&ethernet_phy>;
+
+       ethernet_phy: ethernet-phy@7 {
+               reg = <7>;
+               device_type = "ethernet-phy";
+       };
+};
+
+&i2c0 {
+       status = "okay";
+       clock-frequency = <400000>;
+
+       eeprom: eeprom@52 {
+               compatible = "atmel,24c02";
+               reg = <0x52>;
+       };
+
+};
+
+&sdhci0 {
+       status = "okay";
+};
+
+&spi1 {
+       status = "okay";
+       num-cs = <4>;
+       is-decoded-cs = <0>;
+       flash@0 {
+               compatible = "sst25wf080", "jedec,spi-nor";
+               reg = <1>;
+               spi-max-frequency = <1000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               partition@test {
+                       label = "spi-flash";
+                       reg = <0x0 0x100000>;
+               };
+       };
+};
+
+&uart1 {
+       status = "okay";
+};
+
+&usb0 {
+       status = "okay";
+       dr_mode = "host";
+       usb-phy = <&usb_phy0>;
+};
-- 
1.9.1