According to the hi6220 datasheet, the MMC controller is JEDEC eMMC 4.5
compliant, in addition to supporting a clock of up to 150MHz. The Hikey
schematic also indicates the device utilizes 1.8v signaling. Define these
parameters in the device tree to enable HS200 mode.
Signed-off-by: Ryan Grachek <r...@edited.us>
---
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 3aee6123d161..964e43e05ac6 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -299,7 +299,9 @@
/* GPIO blocks 16 thru 19 do not appear to be routed to pins */
dwmmc_0: dwmmc0@f723d000 {
+ max-frequency = <150000000>;
cap-mmc-highspeed;
+ mmc-hs200-1_8v;
non-removable;
bus-width = <0x8>;
vmmc-supply = <&ldo19>;
--
2.11.0
