Tjenarvi Tjenarvi wrote: > These dmesg if not as Tejun said, Which he said should only libata > drivers used to get more information. Frankly, I don't know which one I > have to take off in kernel configuration to comply this. I guess the > libata is in: > > Device Drivers ---> > SCSI device support ---> > > But, don't know which one to take off, so that only libata driver > compiled. Please tell me.
Please turn off Device Drivers -> ATA/ATAPi/MFM/RLL support. I'm not sure which ide driver is grabbing the first port. Can you post the original .config? > The machine seems nothing wrong whether I used "pci=assign-busses" or > not. But, I found another message that I don't understand in the dmesg > whether I use "pci=assign-busses" or not, the message still occur, I > don't know this is related or not. The message is "PCI: If a device > doesn't work, try "pci=routeirq". If it helps, post a report". Should > I try this kernel option? I don't think you need to pay attention to the message. -- tejun - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
