From: Adam Ford <[email protected]>
[ Upstream commit cd7594ac3281722cb8f10d6f6c7e4287747c7a9d ]
The pin assignment for the wl127x interrupt was incorrect. I am
not sure how this every worked. This also eliminates a conflict with
the SMC911x ethernet driver and properly moves pinmuxes for the
related gpio to omap3_pmx_wkup from omap3_pmx_core.
Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD
DM3730 SOM-LV")
Signed-off-by: Adam Ford <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/logicpd-som-lv.dtsi | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi
b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index c5edc7fe4837..4f2c5ec75714 100644
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -121,7 +121,7 @@
&mmc3 {
interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
- pinctrl-0 = <&mmc3_pins>;
+ pinctrl-0 = <&mmc3_pins &wl127x_gpio>;
pinctrl-names = "default";
vmmc-supply = <&wl12xx_vmmc>;
non-removable;
@@ -132,8 +132,8 @@
wlcore: wlcore@2 {
compatible = "ti,wl1273";
reg = <2>;
- interrupt-parent = <&gpio5>;
- interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
+ interrupt-parent = <&gpio1>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 2 */
ref-clock-frequency = <26000000>;
};
};
@@ -157,8 +157,6 @@
OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3)
/* sdmmc2_dat5.sdmmc3_dat1 */
OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3)
/* sdmmc2_dat6.sdmmc3_dat2 */
OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3)
/* sdmmc2_dat6.sdmmc3_dat3 */
- OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4)
/* mcbsp4_clkx.gpio_152 */
- OMAP3_CORE1_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)
/* sys_boot1.gpio_3 */
OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3)
/* mcspi1_cs1.sdmmc3_cmd */
OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3)
/* mcspi1_cs2.sdmmc_clk */
>;
@@ -228,6 +226,12 @@
OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4)
/* sys_boot2.gpio_4 */
>;
};
+ wl127x_gpio: pinmux_wl127x_gpio_pin {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4)
/* sys_boot0.gpio_2 */
+ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)
/* sys_boot1.gpio_3 */
+ >;
+ };
};
&omap3_pmx_core2 {
--
2.11.0
