On 2018-01-30 07:22 AM, Dmitry Vyukov wrote:
Uh, I've answered this a week ago, but did not notice that Doug
dropped everybody from CC. Reporting to all.
On Mon, Jan 22, 2018 at 8:16 PM, Douglas Gilbert <dgilb...@interlog.com> wrote:
On 2018-01-22 02:06 PM, Dmitry Vyukov wrote:
On Mon, Jan 22, 2018 at 7:57 PM, Douglas Gilbert <dgilb...@interlog.com>
Please show me the output of 'lsscsi -g' on your test machine.
/dev/sg0 is often associated with /dev/sda which is often a SATA
SSD (or a virtualized one) that holds the root file system.
With the sg pass-through driver it is relatively easy to write
random (user provided data) over the root file system which will
almost certainly "root" the system.
This is pretty standard qemu vm started with:
qemu-system-x86_64 -hda wheezy.img -net user,host=10.0.2.10 -net nic
-nographic -kernel arch/x86/boot/bzImage -append "console=ttyS0
root=/dev/sda earlyprintk=serial " -m 2G -smp 4
# lsscsi -g
[0:0:0:0] disk ATA QEMU HARDDISK 0 /dev/sda /dev/sg0
With lk 4.15.0-rc9 I can run your test program (with some additions, see
attachment) for 30 minutes against a scsi_debug simulated disk. You can
easily replicate this test just run 'modprobe scsi_debug' and a third
line should appear in your lsscsi output. The new device will most likely
be /dev/sg2 .
With lk 4.15.0 (release) running against a SAS SSD (SEAGATE ST200FM0073),
the test has been running 20 minutes and counting without problems. That
is using a LSI HBA with the mpt3sas driver.
[1:0:0:0] cd/dvd QEMU QEMU DVD-ROM 2.0. /dev/sr0 /dev/sg1
# readlink /sys/class/scsi_generic/sg0
../../devices/pci0000:00/0000:00:01.1/ata1/host0/target0:0:0/0:0:0:0/scsi_generic/sg0
# cat /sys/class/scsi_generic/sg0/device/vendor
ATA
^^^^^
That subsystem is the culprit IMO, most likely libata.
Until you can show this test failing on something other than an
ATA disk, then I will treat this issue as closed.
Doug Gilbert
Perhaps it misbehaves when it
gets a SCSI command in the T10 range (i.e. not vendor specific) with
a 9 byte cdb length. As far as I'm aware T10 (and the Ansi committee
before it) have never defined a cdb with an odd length.
For those that are not aware, the sg driver is a relatively thin
shim over the block layer, the SCSI mid-level, and a low-level
driver which may have another kernel driver stack underneath it
(e.g. UAS (USB attached SCSI)). The previous report from syzkaller
on the sg driver ("scsi: memory leak in sg_start_req") has resulted
in one accepted patch on the block layer with probably more to
come in the same area.
Testing the patch Dmitry gave (with some added error checks which
reported no problems) with the scsi_debug driver supplying /dev/sg0
I have not seen any problems running that test program. Again
there might be a very slow memory leak, but if there is I don't
believe it is in the sg driver.
Did you run it in a loop? First runs pass just fine for me too.
Is thirty minutes long enough ??
Yes, it certainly should be enough. Here is what I see:
# while ./a.out; do echo RUN; done
RUN
RUN
RUN
RUN
RUN
RUN
RUN
[ 371.977266]
==================================================================
[ 371.980158] BUG: KASAN: double-free or invalid-free in
__put_task_struct+0x1e7/0x5c0
....
Here is full execution trace of the write call if that will be of any help:
https://gist.githubusercontent.com/dvyukov/14ae64c3e753dedf9ab2608676ecf0b9/raw/9803d52bb1e317a9228e362236d042aaf0fa9d69/gistfile1.txt
This is on upstream commit 0d665e7b109d512b7cae3ccef6e8654714887844.
Also attaching my config just in case.
// autogenerated by syzkaller (http://github.com/google/syzkaller)
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#include <stdio.h>
#include <string.h>
#include <errno.h>
#define SG_NEXT_CMD_LEN 0x2283
static const char * usage = "sg_syzk_next_cdb <sg_dev> # (e.g. '/dev/sg3') ";
int main(int argc, const char * argv[])
{
int res, err;
int fd;
long len = 9;
char* p = "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x47\x00\x00\x24\x00"
"\x00\x00\x00\x00\x00\x1c\xbb\xac\x14\x00\xaa\xe0\x00\x00\x01"
"\x00\x07\x07\x00\x00\x59\x08\x00\x00\x00\x80\xfe\x7f\x00\x00\x01";
const char * dev_name;
struct stat a_stat;
if (argc < 2) {
fprintf(stderr, "Usage: %s\n", usage);
return 1;
}
dev_name = argv[1];
if (0 != stat(dev_name, &a_stat)) {
err = errno;
fprintf(stderr, "Unable to stat %s, err: %s\n", dev_name,
strerror(err));
return 1;
}
if ((a_stat.st_mode & S_IFMT) != S_IFCHR) {
fprintf(stderr, "Expected %s, to be sg device\n", dev_name);
return 1;
}
fd = open(dev_name, O_RDWR);
if (fd < 0) {
err = errno;
fprintf(stderr, "open(%s) failed: %s [%d]\n", dev_name, strerror(err),
err);
}
res = ioctl(fd, SG_NEXT_CMD_LEN, &len);
if (res < 0) {
err = errno;
fprintf(stderr, "ioctl failed: %s [%d]\n", strerror(err), err);
}
res = write(fd, p, 46);
if (res < 0) {
err = errno;
fprintf(stderr, "write failed: %s [%d]\n", strerror(err), err);
}
return 0;
}
