From: Shawn Lin <shawn....@rock-chips.com> Add binding document for the Rockchip serial flash controller.
Signed-off-by: Shawn Lin <shawn....@rock-chips.com> Acked-by: Marek Vasut <marek.va...@gmail.com> Acked-by: Rob Herring <r...@kernel.org> Signed-off-by: Andy Yan <andy....@rock-chips.com> --- Changes in v8: None Changes in v7: None Changes in v6: None Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None .../devicetree/bindings/mtd/rockchip-sfc.txt | 31 ++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/rockchip-sfc.txt diff --git a/Documentation/devicetree/bindings/mtd/rockchip-sfc.txt b/Documentation/devicetree/bindings/mtd/rockchip-sfc.txt new file mode 100644 index 0000000..1e449b0 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/rockchip-sfc.txt @@ -0,0 +1,31 @@ +Rockchip Serial Flash Controller + +Required properties: +- compatible : Should be + "rockchip,rv1108-sfc", "rockchip,sfc" for ROCKCHIP RV1108. +- address-cells : Should be 1. +- size-cells : Should be 0. +- clocks: Must contain two entries for each entry in clock-names. +- clock-names: Shall be "sfc" for the transfer-clock, and "hsfc" for + the peripheral clock. +- interrupts : Should contain the interrupt for the device. +- reg: Physical base address of the controller and length of memory mapped. + +Optional properties: +- rockchip,sfc-no-dma: Indicate the controller doesn't support DMA transfer. + +Example: +nor_flash: sfc@301c0000 { + compatible = "rockchip,rv1108-sfc", "rockchip,sfc"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; + clock-names = "sfc", "hsfc"; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x301c0000 0x1000>; + spi-nor@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <12000000>; + reg = <0>; + }; +}; -- 2.7.4