On 02/11/2018 02:30 PM, Philipp Rossak wrote:
Am Sonntag, den 11.02.2018, 10:55 +0300 schrieb Sergey Suloev:
On 02/11/2018 01:07 AM, Philipp Rossak wrote:
On 10.02.2018 22:08, Sergey Suloev wrote:
On 02/11/2018 12:01 AM, Philipp Rossak wrote:
Hey Sergey,
Thanks for mentioning, but I think the problem has nothing to
do
with those patches. I tested them with the v4.15.0 Kernel since
this
is the last stable release and we are right now in the merging
window.
I tested the latest mainline, without those patches and the
kernel
is not booting (I can't see any uart output).
Thanks,
Philipp
On 10.02.2018 14:56, Sergey Suloev wrote:
On 02/09/2018 08:52 PM, Philipp Rossak wrote:
This patchseries fixes the bananapi m1 devicetree, to be
able to
boot again.
The first two patches update/improve the devicetree and the
last
patch adds
all missing regulators.
Regards,
Philipp
Philipp Rossak (3):
arm: dts: sun6i: a31s: bpi-m2: update mmc supply nodes
arm: dts: sun6i: a31s: bpi-m2: improve pmic properties
arm: dts: sun6i: a31s: fix: bpi-m2: add missing
regulators
arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 70
+++++++++++++++++++++++-
1 file changed, 67 insertions(+), 3 deletions(-)
patches are not working
Thanks
same problem, but after applying the patches my device is till
hanging.
Can you please share a bootlog? Here is mine [1]. As you can see
I'm
able to boot.
I build it with this branch [2]. For testing you should replace
the
dtb and the uImage/zImage
Philipp
[1]: https://pastebin.com/mVjv3LDf
[2]:
https://github.com/embed-3d/linux/tree/testing/bpi-m2-regulator-tes
t-2
My dmesg is very similar to yours unless it hangs on the last line
[1].
For this test I used kernel from tag v4.15 with no additional
patching.
[1] https://pastebin.com/3a6bk5Dk
For me it looks like you have a different kernel and also an different
dtb that you patch! And you are applying also a fixup script.
These patches should be applied on top of linux mainline.
fixup script:
Applying kernel provided DT fixup script (sun6i-a31s-fixup.scr)
Linux versions:
4.15.0-00003-g1bbe5edde691 vs 4.15.0-sunxi-dirty
In addition to that you are also booting into fb/hdmi.
If you use my branch (uImage and dtb) and replace the current boot.cmd
with this (to get the boot.scr you need to use mkimage) it should work:
setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait
panic=10
load mmc 0:1 0x43000000 ${fdtfile} || load mmc 0:1 0x43000000
boot/${fdtfile}
load mmc 0:1 0x42000000 uImage || load mmc 0:1 0x42000000 boot/uImage
bootm 0x42000000 - 0x43000000
the script is doing nothing, it is empty. The problem is related to hdmi.
The following dts code makes it happen:
&hdmi {
status = "okay";
};