Introduce a binding for the Hi3660 mailbox controller, the mailbox is
used within application processor (AP), communication processor (CP),
HIFI and MCU, etc.

Acked-by: Rob Herring <r...@kernel.org>
Signed-off-by: Leo Yan <leo....@linaro.org>
---
 .../bindings/mailbox/hisilicon,hi3660-mailbox.txt  | 51 ++++++++++++++++++++++
 1 file changed, 51 insertions(+)
 create mode 100644 
Documentation/devicetree/bindings/mailbox/hisilicon,hi3660-mailbox.txt

diff --git 
a/Documentation/devicetree/bindings/mailbox/hisilicon,hi3660-mailbox.txt 
b/Documentation/devicetree/bindings/mailbox/hisilicon,hi3660-mailbox.txt
new file mode 100644
index 0000000..3e5b453
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/hisilicon,hi3660-mailbox.txt
@@ -0,0 +1,51 @@
+Hisilicon Hi3660 Mailbox Controller
+
+Hisilicon Hi3660 mailbox controller supports up to 32 channels.  Messages
+are passed between processors, including application & communication
+processors, MCU, HIFI, etc.  Each channel is unidirectional and accessed
+by using MMIO registers; it supports maximum to 8 words message.
+
+Controller
+----------
+
+Required properties:
+- compatible:          : Shall be "hisilicon,hi3660-mbox"
+- reg:                 : Offset and length of the device's register set
+- #mbox-cells:         : Must be 3
+                         <&phandle channel dst_irq ack_irq>
+                           phandle     : Label name of controller
+                           channel     : Channel number
+                           dst_irq     : Remote interrupt vector
+                           ack_irq     : Local interrupt vector
+
+- interrupts:          : Contains the two IRQ lines for mailbox.
+
+Example:
+
+mailbox: mailbox@e896b000 {
+       compatible = "hisilicon,hi3660-mbox";
+       reg = <0x0 0xe896b000 0x0 0x1000>;
+       interrupts = <0x0 0xc0 0x4>,
+                    <0x0 0xc1 0x4>;
+       #mbox-cells = <3>;
+};
+
+Client
+------
+
+Required properties:
+- compatible           : See the client docs
+- mboxes               : Standard property to specify a Mailbox (See 
./mailbox.txt)
+                         Cells must match 'mbox-cells' (See Controller docs 
above)
+
+Optional properties
+- mbox-names           : Name given to channels seen in the 'mboxes' property.
+
+Example:
+
+stub_clock: stub_clock@e896b500 {
+       compatible = "hisilicon,hi3660-stub-clk";
+       reg = <0x0 0xe896b500 0x0 0x0100>;
+       #clock-cells = <1>;
+       mboxes = <&mailbox 13 3 0>;
+};
-- 
1.9.1

Reply via email to