Hello! I recently upgraded my kernel to 2.6.21 (.1 and .2 with identical results) and my second IDE controller, a HPT366 on a PCI card, doesn't get enabled any more. The latest previous kernel I used was 2.6.19.7, where the HPT366 worked.
Here's the HPT366 part of the 2.6.21.2 dmesg: HPT366: IDE controller at PCI slot 0000:02:0a.0 ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 HPT366: chipset revision 1 HPT366: using 33 MHz PCI clock HPT366: 100% native mode on irq 18 HPT366: neither IDE port enabled (BIOS) ACPI: PCI Interrupt 0000:02:0a.1[A] -> GSI 18 (level, low) -> IRQ 18 HPT366: using 33 MHz PCI clock HPT366: neither IDE port enabled (BIOS) There is a flash disk connected to the primary channel (master) which also shows up in the controller's BIOS screen, so I don't think it's true that both ports are disabled. Under 2.6.17.9 the "neither IDE port enabled" message doesn't happen and hde gets detected. Please CC me on replies. -- Ciao, Pascal - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
