Tested on Centriq 2400

Reviewed-by: Austin Christ <austi...@codeaurora.org>

On 2/3/2018 12:58 AM, Abhishek Sahu wrote:
1. Assigns use_dma in qup_dev structure itself which will
    help in subsequent patches to determine the mode in IRQ handler.
2. Does minor code reorganization for loops to reduce the
    unnecessary comparison and assignment.

Signed-off-by: Abhishek Sahu <abs...@codeaurora.org>
---
  drivers/i2c/busses/i2c-qup.c | 19 +++++++++++--------
  1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index 9faa26c41a..c68f433 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -190,6 +190,8 @@ struct qup_i2c_dev {
/* dma parameters */
        bool                    is_dma;
+       /* To check if the current transfer is using DMA */
+       bool                    use_dma;
        struct                  dma_pool *dpool;
        struct                  qup_i2c_tag start_tag;
        struct                  qup_i2c_bam brx;
@@ -1297,7 +1299,7 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap,
                           int num)
  {
        struct qup_i2c_dev *qup = i2c_get_adapdata(adap);
-       int ret, len, idx = 0, use_dma = 0;
+       int ret, len, idx = 0;
qup->bus_err = 0;
        qup->qup_err = 0;
@@ -1326,13 +1328,12 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap,
                        len = (msgs[idx].len > qup->out_fifo_sz) ||
                              (msgs[idx].len > qup->in_fifo_sz);
- if ((!is_vmalloc_addr(msgs[idx].buf)) && len) {
-                               use_dma = 1;
-                        } else {
-                               use_dma = 0;
+                       if (is_vmalloc_addr(msgs[idx].buf) || !len)
                                break;
-                       }
                }
+
+               if (idx == num)
+                       qup->use_dma = true;
        }
idx = 0;
@@ -1356,15 +1357,17 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap,
reinit_completion(&qup->xfer); - if (use_dma) {
+               if (qup->use_dma) {
                        ret = qup_i2c_bam_xfer(adap, &msgs[idx], num);
+                       qup->use_dma = false;
+                       break;
                } else {
                        if (msgs[idx].flags & I2C_M_RD)
                                ret = qup_i2c_read_one_v2(qup, &msgs[idx]);
                        else
                                ret = qup_i2c_write_one_v2(qup, &msgs[idx]);
                }
-       } while ((idx++ < (num - 1)) && !use_dma && !ret);
+       } while ((idx++ < (num - 1)) && !ret);
if (!ret)
                ret = qup_i2c_change_state(qup, QUP_RESET_STATE);


--
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.

Reply via email to