Hi Sylwester,
2018년 03월 09일 20:52에 Sylwester Nawrocki 이(가) 쓴 글:
> Hi Inki,
>
> On 03/09/2018 03:40 AM, Inki Dae wrote:
>> 2018년 03월 08일 02:27에 Sylwester Nawrocki 이(가) 쓴 글:
>>> This property is required for specifying link between the HDMI IP block
>>> and the SoC's audio subsystem.
>>>
>>> Signed-off-by: Sylwester Nawrocki <s.nawro...@samsung.com>
>>> ---
>>> arch/arm/boot/dts/exynos5250.dtsi | 1 +
>>> 1 file changed, 1 insertion(+)
>>>
>>> diff --git a/arch/arm/boot/dts/exynos5250.dtsi
>>> b/arch/arm/boot/dts/exynos5250.dtsi
>>> index 56626d1a4235..71d2ede118e3 100644
>>> --- a/arch/arm/boot/dts/exynos5250.dtsi
>>> +++ b/arch/arm/boot/dts/exynos5250.dtsi
>>> @@ -700,6 +700,7 @@
>>> "sclk_hdmiphy", "mout_hdmi";
>>> samsung,syscon-phandle = <&pmu_system_controller>;
>>> phy = <&hdmiphy>;
>>> + #sound-dai-cells = <0>;
>>
>> This patch adds this property to hdmi device node which is bound by HDMI
>> driver
>> of Exynos DRM. As we talked about this at other email thread, seems this
>> property
>> is required mandatorily for Odroid XU3/4 board which uses Exynos5422.
>> There may be something I'm missing so could you let me know how this
>> property
>> is required?
>
> It is required to properly interpret the list of DAI specified in the
> 'sound-dai'
> property. If a device supports only one DAI it will have #sound-dai-cells =
> <0>
> and the sound-dai property values in cpu<->codec link may look like this:
>
> cpu { ... }
> codec {
> sound-dai = <&max98090>, <&hdmi>;
> };
>
> When the CODEC support more DAIs it will have #sound-dai-cells = <1> and we
> can
> additionally specify which DAI we exactly refer to, in this case DAI 0:
>
> cpu { ... }
> codec {
> sound-dai = <&max98095 0>, <&hdmi>;
> };
>
> More details can be found in documentation of of_parse_phandle_with_args()
> function.
>
> The above refers to cpu/codec mapping like I2S0 -> [max9809x, hdmi], on
> Exynos5433
> we have I2S0 -> wm5110 and I2S1 -> hdmi.
Thanks for explanation. By the way, who binds '#sound-dai-cells' property?.
This patch adds this property to hdmi device node which will be bound by HDMI
driver fo Exynos DRM but I don't see any place to bind '#sound-dai-cells'
property in this driver.
So I think some driver like Odroid XU3/4 audio
driver(sound/soc/samsung/odroid.c) or ASoC simple audio card
driver(sound/soc/generic/simple-card.c) should exist and this property should
be placed to such device node.
Thanks,
Inki Dae
>
>
