The Diamond Systems GPIO-MM series of devices contain two 82C55A
devices, which each feature three 8-bit ports of I/O. Since eight input
lines are acquired on a single port input read, the GPIO-MM GPIO driver
may improve multiple input reads by utilizing a get_multiple callback.
This patch implements the gpiomm_gpio_get_multiple function which serves
as the respective get_multiple callback.

Signed-off-by: William Breathitt Gray <vilhelm.g...@gmail.com>
---
 drivers/gpio/gpio-gpio-mm.c | 46 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/drivers/gpio/gpio-gpio-mm.c b/drivers/gpio/gpio-gpio-mm.c
index 11ade5b288f8..d9be9ebe41cf 100644
--- a/drivers/gpio/gpio-gpio-mm.c
+++ b/drivers/gpio/gpio-gpio-mm.c
@@ -171,6 +171,51 @@ static int gpiomm_gpio_get(struct gpio_chip *chip, 
unsigned int offset)
        return !!(port_state & mask);
 }
 
+static int gpiomm_gpio_get_multiple(struct gpio_chip *chip, unsigned long 
*mask,
+       unsigned long *bits)
+{
+       struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
+       size_t i;
+       const size_t ports[] = { 0, 1, 2, 4, 5, 6 };
+       const unsigned int gpio_reg_size = 8;
+       unsigned int bits_offset;
+       size_t word_index;
+       unsigned int word_offset;
+       unsigned long mask_word;
+       const unsigned long port_mask = GENMASK(gpio_reg_size, 0);
+       unsigned long port_state;
+
+       /* clear bits array to a clean slate */
+       bitmap_zero(bits, chip->ngpio);
+
+       /* get bits are evaluated a gpio port register at a time */
+       for (i = 0; i < ARRAY_SIZE(ports); i++) {
+               /* gpio offset in bits array */
+               bits_offset = i * gpio_reg_size;
+
+               /* word index for bits array */
+               word_index = BIT_WORD(bits_offset);
+
+               /* gpio offset within current word of bits array */
+               word_offset = bits_offset % BITS_PER_LONG;
+
+               /* mask of get bits for current gpio within current word */
+               word_mask = mask[word_index] & (port_mask << word_offset);
+               if (!word_mask) {
+                       /* no get bits in this port so skip to next one */
+                       continue;
+               }
+
+               /* read bits from current gpio port */
+               port_state = inb(gpiommgpio->base + ports[i]);
+
+               /* store acquired bits at respective bits array offset */
+               bits[word_index] |= port_state << word_offset;
+       }
+
+       return 0;
+}
+
 static void gpiomm_gpio_set(struct gpio_chip *chip, unsigned int offset,
        int value)
 {
@@ -268,6 +313,7 @@ static int gpiomm_probe(struct device *dev, unsigned int id)
        gpiommgpio->chip.direction_input = gpiomm_gpio_direction_input;
        gpiommgpio->chip.direction_output = gpiomm_gpio_direction_output;
        gpiommgpio->chip.get = gpiomm_gpio_get;
+       gpiommgpio->chip.get_multiple = gpiomm_gpio_get_multiple;
        gpiommgpio->chip.set = gpiomm_gpio_set;
        gpiommgpio->chip.set_multiple = gpiomm_gpio_set_multiple;
        gpiommgpio->base = base[id];
-- 
2.16.2

Reply via email to