The ACCES I/O 104-DIO-48E series of devices contain two Programmable
Peripheral Interface (PPI) chips of type 82C55, which each feature three
8-bit ports of I/O. Since eight input lines are acquired on a single
port input read, the 104-DIO-48E GPIO driver may improve multiple input
reads by utilizing a get_multiple callback. This patch implements the
dio48e_gpio_get_multiple function which serves as the respective
get_multiple callback.
Signed-off-by: William Breathitt Gray <vilhelm.g...@gmail.com>
---
drivers/gpio/gpio-104-dio-48e.c | 46 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/drivers/gpio/gpio-104-dio-48e.c b/drivers/gpio/gpio-104-dio-48e.c
index bab3b94c5cbc..537b436c6e7f 100644
--- a/drivers/gpio/gpio-104-dio-48e.c
+++ b/drivers/gpio/gpio-104-dio-48e.c
@@ -182,6 +182,51 @@ static int dio48e_gpio_get(struct gpio_chip *chip,
unsigned offset)
return !!(port_state & mask);
}
+static int dio48e_gpio_get_multiple(struct gpio_chip *chip, unsigned long
*mask,
+ unsigned long *bits)
+{
+ struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
+ size_t i;
+ const size_t ports[] = { 0, 1, 2, 4, 5, 6 };
+ const unsigned int gpio_reg_size = 8;
+ unsigned int bits_offset;
+ size_t word_index;
+ unsigned int word_offset;
+ unsigned long mask_word;
+ const unsigned long port_mask = GENMASK(gpio_reg_size, 0);
+ unsigned long port_state;
+
+ /* clear bits array to a clean slate */
+ bitmap_zero(bits, chip->ngpio);
+
+ /* get bits are evaluated a gpio port register at a time */
+ for (i = 0; i < ARRAY_SIZE(ports); i++) {
+ /* gpio offset in bits array */
+ bits_offset = i * gpio_reg_size;
+
+ /* word index for bits array */
+ word_index = BIT_WORD(bits_offset);
+
+ /* gpio offset within current word of bits array */
+ word_offset = bits_offset % BITS_PER_LONG;
+
+ /* mask of get bits for current gpio within current word */
+ word_mask = mask[word_index] & (port_mask << word_offset);
+ if (!word_mask) {
+ /* no get bits in this port so skip to next one */
+ continue;
+ }
+
+ /* read bits from current gpio port */
+ port_state = inb(dio48egpio->base + ports[i]);
+
+ /* store acquired bits at respective bits array offset */
+ bits[word_index] |= port_state << word_offset;
+ }
+
+ return 0;
+}
+
static void dio48e_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
@@ -384,6 +429,7 @@ static int dio48e_probe(struct device *dev, unsigned int id)
dio48egpio->chip.direction_input = dio48e_gpio_direction_input;
dio48egpio->chip.direction_output = dio48e_gpio_direction_output;
dio48egpio->chip.get = dio48e_gpio_get;
+ dio48egpio->chip.get_multiple = dio48e_gpio_get_multiple;
dio48egpio->chip.set = dio48e_gpio_set;
dio48egpio->chip.set_multiple = dio48e_gpio_set_multiple;
dio48egpio->base = base[id];
--
2.16.2
