Re: [PATCH v1 07/19] arm: dts: mt7623: fix the regulators mmc should use on bananapi-r2

[Matthias Brugger]

On 02/23/2018 11:16 AM, sean.w...@mediatek.com wrote:
> From: Sean Wang <sean.w...@mediatek.com>
> 
> Both mmc devices on bananapi-r2 board should all use the fixed regulators
> as their power source instead of PMIC MT6323 exports.
> 
> Signed-off-by: Sean Wang <sean.w...@mediatek.com>

Pushed to v4.16-next/dts32

Thanks!

> ---
>  arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 17 +++++++++++++----
>  1 file changed, 13 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts 
> b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> index f660d15..8ef91d6 100644
> --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> @@ -39,6 +39,15 @@
>               };
>       };
>  
> +     reg_1p8v: regulator-1p8v {
> +             compatible = "regulator-fixed";
> +             regulator-name = "fixed-1.8V";
> +             regulator-min-microvolt = <1800000>;
> +             regulator-max-microvolt = <1800000>;
> +             regulator-boot-on;
> +             regulator-always-on;
> +     };
> +
>       reg_3p3v: regulator-3p3v {
>               compatible = "regulator-fixed";
>               regulator-name = "fixed-3.3V";
> @@ -213,8 +222,8 @@
>       bus-width = <8>;
>       max-frequency = <50000000>;
>       cap-mmc-highspeed;
> -     vmmc-supply = <&mt6323_vemc3v3_reg>;
> -     vqmmc-supply = <&mt6323_vio18_reg>;
> +     vmmc-supply = <&reg_3p3v>;
> +     vqmmc-supply = <&reg_1p8v>;
>       non-removable;
>  };
>  
> @@ -227,8 +236,8 @@
>       max-frequency = <50000000>;
>       cap-sd-highspeed;
>       cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
> -     vmmc-supply = <&mt6323_vmch_reg>;
> -     vqmmc-supply = <&mt6323_vio18_reg>;
> +     vmmc-supply = <&reg_3p3v>;
> +     vqmmc-supply = <&reg_3p3v>;
>  };
>  
>  &pcie {
>