On 12/03/2018 18:53, Pierre-Yves MORDRET wrote:
Feature prevents I2C lock-ups. Mechanism resets I2C state machine
and releases SCL/SDA signals but preserves I2C registers.

Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mord...@st.com>
---
   Version history:
     v1:
        * Initial
---
---
  drivers/i2c/busses/i2c-stm32f7.c | 32 +++++++++++++++++++++++++++++---
  1 file changed, 29 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 69a2e5e..3808bc9 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -718,6 +718,20 @@ static void stm32f7_i2c_smbus_reload(struct 
stm32f7_i2c_dev *i2c_dev)
        writel_relaxed(cr2, i2c_dev->base + STM32F7_I2C_CR2);
  }
+static int stm32f7_i2c_recover_bus(struct i2c_adapter *i2c_adap)
+{
+       struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap);
+
+       dev_info(i2c_dev->dev, "Trying to recover bus\n");
+
+       stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1,
+                            STM32F7_I2C_CR1_PE);

This only "releases" the scl / sda on the stm32f7 end (outputs are hiz I guess).
It doesn't trigger the scl clocking needed to recover a stuck device  via i2c 
recovery
from what I can see in the data sheet.


+
+       stm32f7_i2c_hw_config(i2c_dev);

Nothing in here either I think.


+
+       return 0;
+}
+
  static int stm32f7_i2c_wait_free_bus(struct stm32f7_i2c_dev *i2c_dev)
  {
        u32 status;
@@ -727,12 +741,18 @@ static int stm32f7_i2c_wait_free_bus(struct 
stm32f7_i2c_dev *i2c_dev)
                                         status,
                                         !(status & STM32F7_I2C_ISR_BUSY),
                                         10, 1000);
+       if (!ret)
+               return 0;
+
+       dev_info(i2c_dev->dev, "bus busy\n");
+
+       ret = i2c_recover_bus(&i2c_dev->adap);
        if (ret) {
-               dev_dbg(i2c_dev->dev, "bus busy\n");
-               ret = -EBUSY;
+               dev_err(i2c_dev->dev, "Failed to recover the bus (%d)\n", ret);
+               return ret;
        }
- return ret;
+       return -EBUSY;
  }
static void stm32f7_i2c_xfer_msg(struct stm32f7_i2c_dev *i2c_dev,
@@ -1476,6 +1496,7 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void 
*data)
        if (status & STM32F7_I2C_ISR_BERR) {
                dev_err(dev, "<%s>: Bus error\n", __func__);
                writel_relaxed(STM32F7_I2C_ICR_BERRCF, base + STM32F7_I2C_ICR);
+               i2c_recover_bus(&i2c_dev->adap);
                f7_msg->result = -EIO;
        }
@@ -1760,6 +1781,10 @@ static struct i2c_algorithm stm32f7_i2c_algo = {
        .unreg_slave = stm32f7_i2c_unreg_slave,
  };
+static struct i2c_bus_recovery_info stm32f7_i2c_recovery_info = {
+       .recover_bus = stm32f7_i2c_recover_bus,
+};
+
  static int stm32f7_i2c_probe(struct platform_device *pdev)
  {
        struct device_node *np = pdev->dev.of_node;
@@ -1879,6 +1904,7 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
        adap->algo = &stm32f7_i2c_algo;
        adap->dev.parent = &pdev->dev;
        adap->dev.of_node = pdev->dev.of_node;
+       adap->bus_recovery_info = &stm32f7_i2c_recovery_info;
init_completion(&i2c_dev->complete);


--
Regards
Phil

Reply via email to