On Mon, Mar 19, 2018 at 3:51 AM, Guo Ren <ren_...@c-sky.com> wrote:
> diff --git a/arch/csky/Kconfig b/arch/csky/Kconfig
> new file mode 100644
> index 0000000..694c1f8
> --- /dev/null
> +++ b/arch/csky/Kconfig
> @@ -0,0 +1,203 @@
> +config CSKY
> + bool
> + default y
> + select ARCH_USE_BUILTIN_BSWAP
> + select ARCH_WANT_IPC_PARSE_VERSION
Drop ipc_parse_version here, it's only for old architectures.
> + select HAVE_OPROFILE
> + select HAVE_PERF_EVENTS
Do you still need oprofile when you have perf?
> + select MODULES_USE_ELF_REL if MODULES
> + select MODULES_USE_ELF_RELA if MODULES
You should only need one of these two.
> + select OLD_SIGACTION
> + select OLD_SIGSUSPEND3
These should not be needed.
> +config CPU_HAS_CACHEV2
> + bool
> + default n
> +
> +config CPU_HAS_HILO
> + bool
> + default n
> +
> +config CPU_HAS_TLBI
> + bool
> + default n
'default n' is redundant and can be dropped.
> +config GENERIC_CALIBRATE_DELAY
> + bool
> + default y
Does your architecture provide a reliable high-reslution clocksource?
If yes, you
could use that for the delay, rather than a calibrated loop.
> +choice
> + prompt "CPU MODEL"
> + default CPU_CK610
> +
> +config CPU_CK610
> + bool "CSKY CPU ck610"
> + select CPU_NEED_TLBSYNC
> + select CPU_NEED_SOFTALIGN
> +
> +config CPU_CK810
> + bool "CSKY CPU ck810"
> + select HIGHMEM
> + select CPU_HAS_HILO
> + select CPU_NEED_TLBSYNC
> +
> +config CPU_CK807
> + bool "CSKY CPU ck807"
> + select HIGHMEM
> + select CPU_HAS_HILO
> +
> +config CPU_CK860
> + bool "CSKY CPU ck860"
> + select HIGHMEM
> + select CPU_HAS_TLBI
> + select CPU_HAS_CACHEV2
> +endchoice
Why select 'HIGHMEM' based on the CPU type? You should only need it
when you have more than 1GB of RAM, and it can be a performance
problem when it's enabled without need.
Usually the kernel should allow multiple CPU types to be selected
together, or ask for a "minimum architecture" level to be selected
by allow newer cores to be used as a superset.
> +config CPU_TLB_SIZE
> + int
> + default "128" if(CPU_CK610 || CPU_CK807 || CPU_CK810)
> + default "1024" if(CPU_CK860)
> +
> +config L1_CACHE_SHIFT
> + int
> + default "4" if(CPU_CK610)
> + default "5" if(CPU_CK807 || CPU_CK810)
> + default "6" if(CPU_CK860)
I think you then need to reverse the order of the list here: When e.g. CK860
and CK810 are both enabled, L1_CACHE_SHIFT should be the largest
possible size.
> +config SSEG0_BASE
> + hex "Direct mapping physical address"
> + default 0x0
> + help
> + There are MSAx regs can be used to change the base physical address
> + of direct mapping. The default base physical address is 0x0.
> +
> +config RAM_BASE
> + hex "DRAM base address offset from SSEG0_BASE, it must be the same
> with dts memory."
> + default 0x08000000
To allow one kernel to run on multiple boards, it's better to detect
these two at runtime.
> +config CSKY_NR_IRQS
> + int "NR_IRQS to max virtual interrupt numbers of the whole system"
> + range 64 8192
> + default "128"
> +endmenu
This should no longer be needed, with the IRQ domain code, any number
of interrupts
can be used without noticeable overhead.
> +menu "Power management options"
> +
> +source "kernel/power/Kconfig"
> +
> +config ARCH_SUSPEND_POSSIBLE
> + bool y
> + default y
Make it either
def_bool y
or
bool
default y
> +config CSKY_BUILTIN_DTB
> + bool "Use kernel builtin dtb"
> + default n
> +
> +config CSKY_BUILTIN_DTB_NAME
> + string "kernel builtin dtb name"
> + depends on CSKY_BUILTIN_DTB
It's generally better not to use a builtin dtb, but use the bootloader
to pass a dtb.
If you need to support existing bootloaders, the best way is to allow
appending the dtb to the kernel.
> +ifeq ($(VERSION)_$(PATCHLEVEL), 4_9)
> +COMPAT_KERNEL_4_9 = -DCOMPAT_KERNEL_4_9
> +endif
Should not be needed
> +KBUILD_CFLAGS += -ffreestanding \
-ffreestanding usually results in worse code and should not be needed
> + -fno-tree-dse \
> + -pipe \
> + -Wno-uninitialized \
For -Wno-uninitialized, better fix the bugs properly. Can you explain
why you want
-fno-tree-dse?
> +++ b/arch/csky/abiv1/Makefile
> @@ -0,0 +1,8 @@
> +obj-y += src/bswapdi.o
> +obj-y += src/bswapsi.o
> +obj-y += src/cacheflush.o
> +obj-y += src/memcpy.o
> +obj-y += src/mmap.o
> +
> +obj-$(CONFIG_CPU_NEED_SOFTALIGN) += src/alignment.o
Better not use subdirectories like that.
Can you explain why you need the alignement fixups?
Arnd
