On Mon, Mar 19, 2018 at 03:48:50PM +0000, Sasha Levin wrote:
> From: Lukas Wunner <[email protected]>
>
> [ Upstream commit 3e81a4ca51a1172253078ca7abd6a91040b8fcf4 ]
>
Unfortunately this commit had to be fixed up with ab2f336cb7e6
("Bluetooth: hci_bcm: Make shutdown and device wake GPIO optional")
by Stefan Wahren (+cc).
Please be sure to apply that one on top. Thanks!
> Commit 0395ffc1ee05 ("Bluetooth: hci_bcm: Add PM for BCM devices")
> amended this driver to request a shutdown and device wake GPIO on probe,
> but mandated that only one of them need to be present:
>
> /* Make sure at-least one of the GPIO is defined and that
> * a name is specified for this instance
> */
> if ((!dev->device_wakeup && !dev->shutdown) || !dev->name) {
> dev_err(&pdev->dev, "invalid platform data\n");
> return -EINVAL;
> }
>
> However the same commit added a call to bcm_gpio_set_power() to the
> ->probe hook, which unconditionally accesses *both* GPIOs. Luckily,
> the resulting NULL pointer deref was never reported, suggesting there's
> no machine where either GPIO is missing.
>
> Commit 8a92056837fd ("Bluetooth: hci_bcm: Add (runtime)pm support to the
> serdev driver") removed the check whether at least one of the GPIOs is
> present without specifying a reason.
>
> Because commit 62aaefa7d038 ("Bluetooth: hci_bcm: improve use of gpios
> API") refactored the driver to use devm_gpiod_get_optional() instead of
> devm_gpiod_get(), one is now tempted to believe that the driver doesn't
> require *any* of the two GPIOs.
>
> Which is wrong, the driver still requires both GPIOs to avoid a NULL
> pointer deref. To this end, establish the status quo ante and request
> the GPIOs with devm_gpiod_get() again. Bail out of ->probe if either
> of them is missing.
>
> Oddly enough, whereas bcm_gpio_set_power() accesses the device wake pin
> unconditionally, bcm_suspend_device() and bcm_resume_device() do check
> for its presence before accessing it. Those checks are superfluous,
> so remove them.
>
> Cc: Frédéric Danis <[email protected]>
> Cc: Loic Poulain <[email protected]>
> Cc: Hans de Goede <[email protected]>
> Cc: Uwe Kleine-König <[email protected]>
> Cc: Linus Walleij <[email protected]>
> Reviewed-by: Andy Shevchenko <[email protected]>
> Signed-off-by: Lukas Wunner <[email protected]>
> Signed-off-by: Marcel Holtmann <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
> ---
> drivers/bluetooth/hci_bcm.c | 24 +++++++++---------------
> 1 file changed, 9 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
> index 707c2d1b84c7..b8eeac4e6f35 100644
> --- a/drivers/bluetooth/hci_bcm.c
> +++ b/drivers/bluetooth/hci_bcm.c
> @@ -577,11 +577,9 @@ static int bcm_suspend_device(struct device *dev)
> }
>
> /* Suspend the device */
> - if (bdev->device_wakeup) {
> - gpiod_set_value(bdev->device_wakeup, false);
> - bt_dev_dbg(bdev, "suspend, delaying 15 ms");
> - mdelay(15);
> - }
> + gpiod_set_value(bdev->device_wakeup, false);
> + bt_dev_dbg(bdev, "suspend, delaying 15 ms");
> + mdelay(15);
>
> return 0;
> }
> @@ -592,11 +590,9 @@ static int bcm_resume_device(struct device *dev)
>
> bt_dev_dbg(bdev, "");
>
> - if (bdev->device_wakeup) {
> - gpiod_set_value(bdev->device_wakeup, true);
> - bt_dev_dbg(bdev, "resume, delaying 15 ms");
> - mdelay(15);
> - }
> + gpiod_set_value(bdev->device_wakeup, true);
> + bt_dev_dbg(bdev, "resume, delaying 15 ms");
> + mdelay(15);
>
> /* When this executes, the device has woken up already */
> if (bdev->is_suspended && bdev->hu) {
> @@ -779,14 +775,12 @@ static int bcm_get_resources(struct bcm_device *dev)
>
> dev->clk = devm_clk_get(dev->dev, NULL);
>
> - dev->device_wakeup = devm_gpiod_get_optional(dev->dev,
> - "device-wakeup",
> - GPIOD_OUT_LOW);
> + dev->device_wakeup = devm_gpiod_get(dev->dev, "device-wakeup",
> + GPIOD_OUT_LOW);
> if (IS_ERR(dev->device_wakeup))
> return PTR_ERR(dev->device_wakeup);
>
> - dev->shutdown = devm_gpiod_get_optional(dev->dev, "shutdown",
> - GPIOD_OUT_LOW);
> + dev->shutdown = devm_gpiod_get(dev->dev, "shutdown", GPIOD_OUT_LOW);
> if (IS_ERR(dev->shutdown))
> return PTR_ERR(dev->shutdown);
>
> --
> 2.14.1
