[PATCH 4.4 021/134] ARM: dts: Adjust moxart IRQ controller and flags

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Walleij <linus.wall...@linaro.org>


[ Upstream commit c2a736b698008d296c5010ec39077eeb5796109f ]

The moxart interrupt line flags were not respected in previous
driver: instead of assigning them per-consumer, a fixes mask
was set in the controller.

With the migration to a standard Faraday driver we need to
set up and handle the consumer flags correctly. Also remove
the Moxart-specific flags when switching to using real consumer
flags.

Extend the register window to 0x100 bytes as we may have a few
more registers in there and it doesn't hurt.

Tested-by: Jonas Jensen <jonas.jen...@gmail.com>
Signed-off-by: Jonas Jensen <jonas.jen...@gmail.com>
Signed-off-by: Linus Walleij <linus.wall...@linaro.org>
Signed-off-by: Olof Johansson <o...@lixom.net>
Signed-off-by: Sasha Levin <alexander.le...@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
 arch/arm/boot/dts/moxart-uc7112lx.dts |    2 +-
 arch/arm/boot/dts/moxart.dtsi         |   17 +++++++++--------
 2 files changed, 10 insertions(+), 9 deletions(-)

--- a/arch/arm/boot/dts/moxart-uc7112lx.dts
+++ b/arch/arm/boot/dts/moxart-uc7112lx.dts
@@ -6,7 +6,7 @@
  */
 
 /dts-v1/;
-/include/ "moxart.dtsi"
+#include "moxart.dtsi"
 
 / {
        model = "MOXA UC-7112-LX";
--- a/arch/arm/boot/dts/moxart.dtsi
+++ b/arch/arm/boot/dts/moxart.dtsi
@@ -6,6 +6,7 @@
  */
 
 /include/ "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
        compatible = "moxa,moxart";
@@ -36,8 +37,8 @@
                ranges;
 
                intc: interrupt-controller@98800000 {
-                       compatible = "moxa,moxart-ic";
-                       reg = <0x98800000 0x38>;
+                       compatible = "moxa,moxart-ic", "faraday,ftintc010";
+                       reg = <0x98800000 0x100>;
                        interrupt-controller;
                        #interrupt-cells = <2>;
                        interrupt-mask = <0x00080000>;
@@ -59,7 +60,7 @@
                timer: timer@98400000 {
                        compatible = "moxa,moxart-timer";
                        reg = <0x98400000 0x42>;
-                       interrupts = <19 1>;
+                       interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
                        clocks = <&clk_apb>;
                };
 
@@ -80,7 +81,7 @@
                dma: dma@90500000 {
                        compatible = "moxa,moxart-dma";
                        reg = <0x90500080 0x40>;
-                       interrupts = <24 0>;
+                       interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
                        #dma-cells = <1>;
                };
 
@@ -93,7 +94,7 @@
                sdhci: sdhci@98e00000 {
                        compatible = "moxa,moxart-sdhci";
                        reg = <0x98e00000 0x5C>;
-                       interrupts = <5 0>;
+                       interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&clk_apb>;
                        dmas =  <&dma 5>,
                                <&dma 5>;
@@ -120,7 +121,7 @@
                mac0: mac@90900000 {
                        compatible = "moxa,moxart-mac";
                        reg = <0x90900000 0x90>;
-                       interrupts = <25 0>;
+                       interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
                        phy-handle = <&ethphy0>;
                        phy-mode = "mii";
                        status = "disabled";
@@ -129,7 +130,7 @@
                mac1: mac@92000000 {
                        compatible = "moxa,moxart-mac";
                        reg = <0x92000000 0x90>;
-                       interrupts = <27 0>;
+                       interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
                        phy-handle = <&ethphy1>;
                        phy-mode = "mii";
                        status = "disabled";
@@ -138,7 +139,7 @@
                uart0: uart@98200000 {
                        compatible = "ns16550a";
                        reg = <0x98200000 0x20>;
-                       interrupts = <31 8>;
+                       interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
                        reg-shift = <2>;
                        reg-io-width = <4>;
                        clock-frequency = <14745600>;