Now that there are no users of custom Atmel platform data, and everyone has switched to the generic device properties, we can remove support for the platform data.
Acked-by: Nick Dyer <n...@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torok...@gmail.com> --- MAINTAINERS | 1 - drivers/input/touchscreen/atmel_mxt_ts.c | 130 +++++++++------------ include/linux/platform_data/atmel_mxt_ts.h | 31 ----- 3 files changed, 55 insertions(+), 107 deletions(-) delete mode 100644 include/linux/platform_data/atmel_mxt_ts.h diff --git a/MAINTAINERS b/MAINTAINERS index 205c8fc12a9c0..4442559713ea4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2394,7 +2394,6 @@ T: git git://github.com/ndyer/linux.git S: Maintained F: Documentation/devicetree/bindings/input/atmel,maxtouch.txt F: drivers/input/touchscreen/atmel_mxt_ts.c -F: include/linux/platform_data/atmel_mxt_ts.h ATMEL SAMA5D2 ADC DRIVER M: Ludovic Desroches <ludovic.desroc...@microchip.com> diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 799d2ac35787b..5d9699fe1b55a 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -23,10 +23,10 @@ #include <linux/delay.h> #include <linux/firmware.h> #include <linux/i2c.h> -#include <linux/platform_data/atmel_mxt_ts.h> #include <linux/input/mt.h> #include <linux/interrupt.h> #include <linux/of.h> +#include <linux/property.h> #include <linux/slab.h> #include <linux/gpio/consumer.h> #include <linux/property.h> @@ -269,12 +269,16 @@ static const struct v4l2_file_operations mxt_video_fops = { .poll = vb2_fop_poll, }; +enum mxt_suspend_mode { + MXT_SUSPEND_DEEP_SLEEP = 0, + MXT_SUSPEND_T9_CTRL = 1, +}; + /* Each client has this additional data */ struct mxt_data { struct i2c_client *client; struct input_dev *input_dev; char phys[64]; /* device physical location */ - const struct mxt_platform_data *pdata; struct mxt_object *object_table; struct mxt_info info; unsigned int irq; @@ -326,6 +330,9 @@ struct mxt_data { /* for config update handling */ struct completion crc_completion; + u32 *t19_keymap; + unsigned int t19_num_keys; + enum mxt_suspend_mode suspend_mode; }; @@ -745,15 +752,14 @@ static int mxt_write_object(struct mxt_data *data, static void mxt_input_button(struct mxt_data *data, u8 *message) { struct input_dev *input = data->input_dev; - const struct mxt_platform_data *pdata = data->pdata; int i; - for (i = 0; i < pdata->t19_num_keys; i++) { - if (pdata->t19_keymap[i] == KEY_RESERVED) + for (i = 0; i < data->t19_num_keys; i++) { + if (data->t19_keymap[i] == KEY_RESERVED) continue; /* Active-low switch */ - input_report_key(input, pdata->t19_keymap[i], + input_report_key(input, data->t19_keymap[i], !(message[1] & BIT(i))); } } @@ -761,7 +767,7 @@ static void mxt_input_button(struct mxt_data *data, u8 *message) static void mxt_input_sync(struct mxt_data *data) { input_mt_report_pointer_emulation(data->input_dev, - data->pdata->t19_num_keys); + data->t19_num_keys); input_sync(data->input_dev); } @@ -1861,7 +1867,6 @@ static void mxt_input_close(struct input_dev *dev); static void mxt_set_up_as_touchpad(struct input_dev *input_dev, struct mxt_data *data) { - const struct mxt_platform_data *pdata = data->pdata; int i; input_dev->name = "Atmel maXTouch Touchpad"; @@ -1875,15 +1880,14 @@ static void mxt_set_up_as_touchpad(struct input_dev *input_dev, input_abs_set_res(input_dev, ABS_MT_POSITION_Y, MXT_PIXELS_PER_MM); - for (i = 0; i < pdata->t19_num_keys; i++) - if (pdata->t19_keymap[i] != KEY_RESERVED) + for (i = 0; i < data->t19_num_keys; i++) + if (data->t19_keymap[i] != KEY_RESERVED) input_set_capability(input_dev, EV_KEY, - pdata->t19_keymap[i]); + data->t19_keymap[i]); } static int mxt_initialize_input_device(struct mxt_data *data) { - const struct mxt_platform_data *pdata = data->pdata; struct device *dev = &data->client->dev; struct input_dev *input_dev; int error; @@ -1949,7 +1953,7 @@ static int mxt_initialize_input_device(struct mxt_data *data) } /* If device has buttons we assume it is a touchpad */ - if (pdata->t19_num_keys) { + if (data->t19_num_keys) { mxt_set_up_as_touchpad(input_dev, data); mt_flags |= INPUT_MT_POINTER; } else { @@ -2923,51 +2927,42 @@ static void mxt_input_close(struct input_dev *dev) mxt_stop(data); } -static const struct mxt_platform_data * -mxt_parse_device_properties(struct i2c_client *client) +static int mxt_parse_device_properties(struct mxt_data *data) { static const char keymap_property[] = "linux,gpio-keymap"; - struct mxt_platform_data *pdata; + struct device *dev = &data->client->dev; u32 *keymap; int n_keys; int error; - pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL); - if (!pdata) - return ERR_PTR(-ENOMEM); - - if (device_property_present(&client->dev, keymap_property)) { - n_keys = device_property_read_u32_array(&client->dev, - keymap_property, + if (device_property_present(dev, keymap_property)) { + n_keys = device_property_read_u32_array(dev, keymap_property, NULL, 0); if (n_keys <= 0) { error = n_keys < 0 ? n_keys : -EINVAL; - dev_err(&client->dev, - "invalid/malformed '%s' property: %d\n", + dev_err(dev, "invalid/malformed '%s' property: %d\n", keymap_property, error); - return ERR_PTR(error); + return error; } - keymap = devm_kmalloc_array(&client->dev, n_keys, sizeof(u32), + keymap = devm_kmalloc_array(dev, n_keys, sizeof(*keymap), GFP_KERNEL); if (!keymap) - return ERR_PTR(-ENOMEM); + return -ENOMEM; - error = device_property_read_u32_array(&client->dev, - keymap_property, + error = device_property_read_u32_array(dev, keymap_property, keymap, n_keys); if (error) { - dev_err(&client->dev, - "failed to parse '%s' property: %d\n", + dev_err(dev, "failed to parse '%s' property: %d\n", keymap_property, error); - return ERR_PTR(error); + return error; } - pdata->t19_keymap = keymap; - pdata->t19_num_keys = n_keys; + data->t19_keymap = keymap; + data->t19_num_keys = n_keys; } - return pdata; + return 0; } #ifdef CONFIG_ACPI @@ -3050,25 +3045,12 @@ static const struct dmi_system_id mxt_dmi_table[] = { { } }; -static int mxt_acpi_probe(struct i2c_client *client) +static int mxt_prepare_acpi_properties(struct i2c_client *client) { struct acpi_device *adev; const struct dmi_system_id *system_id; const struct mxt_acpi_platform_data *acpi_pdata; - /* - * Ignore ACPI devices representing bootloader mode. - * - * This is a bit of a hack: Google Chromebook BIOS creates ACPI - * devices for both application and bootloader modes, but we are - * interested in application mode only (if device is in bootloader - * mode we'll end up switching into application anyway). So far - * application mode addresses were all above 0x40, so we'll use it - * as a threshold. - */ - if (client->addr < 0x40) - return -ENXIO; - adev = ACPI_COMPANION(&client->dev); if (!adev) return -ENOENT; @@ -3104,24 +3086,12 @@ static int mxt_acpi_probe(struct i2c_client *client) return 0; } #else -static int mxt_acpi_probe(struct i2c_client *client) +static int mxt_prepare_acpi_properties(struct i2c_client *client) { return -ENOENT; } #endif -static const struct mxt_platform_data * -mxt_get_platform_data(struct i2c_client *client) -{ - const struct mxt_platform_data *pdata; - - pdata = dev_get_platdata(&client->dev); - if (pdata) - return pdata; - - return mxt_parse_device_properties(client); -} - static const struct dmi_system_id chromebook_T9_suspend_dmi[] = { { .matches = { @@ -3140,16 +3110,20 @@ static const struct dmi_system_id chromebook_T9_suspend_dmi[] = { static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct mxt_data *data; - const struct mxt_platform_data *pdata; int error; - error = mxt_acpi_probe(client); - if (error && error != -ENOENT) - return error; - - pdata = mxt_get_platform_data(client); - if (IS_ERR(pdata)) - return PTR_ERR(pdata); + /* + * Ignore ACPI devices representing bootloader mode. + * + * This is a bit of a hack: Google Chromebook BIOS creates ACPI + * devices for both application and bootloader modes, but we are + * interested in application mode only (if device is in bootloader + * mode we'll end up switching into application anyway). So far + * application mode addresses were all above 0x40, so we'll use it + * as a threshold. + */ + if (ACPI_COMPANION(&client->dev) && client->addr < 0x40) + return -ENXIO; data = devm_kzalloc(&client->dev, sizeof(struct mxt_data), GFP_KERNEL); if (!data) @@ -3159,7 +3133,6 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id) client->adapter->nr, client->addr); data->client = client; - data->pdata = pdata; data->irq = client->irq; i2c_set_clientdata(client, data); @@ -3170,6 +3143,14 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id) data->suspend_mode = dmi_check_system(chromebook_T9_suspend_dmi) ? MXT_SUSPEND_T9_CTRL : MXT_SUSPEND_DEEP_SLEEP; + error = mxt_prepare_acpi_properties(client); + if (error && error != -ENOENT) + return error; + + error = mxt_parse_device_properties(data); + if (error) + return error; + data->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(data->reset_gpio)) { @@ -3179,8 +3160,7 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id) } error = devm_request_threaded_irq(&client->dev, client->irq, - NULL, mxt_interrupt, - pdata->irqflags | IRQF_ONESHOT, + NULL, mxt_interrupt, IRQF_ONESHOT, client->name, data); if (error) { dev_err(&client->dev, "Failed to register interrupt\n"); @@ -3300,7 +3280,7 @@ MODULE_DEVICE_TABLE(i2c, mxt_id); static struct i2c_driver mxt_driver = { .driver = { .name = "atmel_mxt_ts", - .of_match_table = of_match_ptr(mxt_of_match), + .of_match_table = mxt_of_match, .acpi_match_table = ACPI_PTR(mxt_acpi_id), .pm = &mxt_pm_ops, }, diff --git a/include/linux/platform_data/atmel_mxt_ts.h b/include/linux/platform_data/atmel_mxt_ts.h deleted file mode 100644 index 695035a8d7fb9..0000000000000 --- a/include/linux/platform_data/atmel_mxt_ts.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Atmel maXTouch Touchscreen driver - * - * Copyright (C) 2010 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.s...@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __LINUX_PLATFORM_DATA_ATMEL_MXT_TS_H -#define __LINUX_PLATFORM_DATA_ATMEL_MXT_TS_H - -#include <linux/types.h> - -enum mxt_suspend_mode { - MXT_SUSPEND_DEEP_SLEEP = 0, - MXT_SUSPEND_T9_CTRL = 1, -}; - -/* The platform data for the Atmel maXTouch touchscreen driver */ -struct mxt_platform_data { - unsigned long irqflags; - u8 t19_num_keys; - const unsigned int *t19_keymap; - enum mxt_suspend_mode suspend_mode; -}; - -#endif /* __LINUX_PLATFORM_DATA_ATMEL_MXT_TS_H */ -- 2.16.2.804.g6dcf76e118-goog