On 2018-03-20 19:30, Can Guo wrote:
Add UFS PHY support to make SDM845 UFS work with common PHY framework.

Signed-off-by: Can Guo <c...@codeaurora.org>
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 120 +++++++++++++++++++++++++++++++++++-
 drivers/phy/qualcomm/phy-qcom-qmp.h |   8 +++
 2 files changed, 126 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c
b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 6470c5d..aeb2377 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -156,6 +156,11 @@ enum qphy_reg_layout {
        [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
 };

+static const unsigned int sdm845_ufsphy_regs_layout[] = {
+       [QPHY_START_CTRL]               = 0x00,
+       [QPHY_PCS_READY_STATUS]         = 0x168,
+};
+
 static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
        QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
        QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
@@ -490,6 +495,74 @@ enum qphy_reg_layout {
        QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
 };

+static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = {
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0xd5),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x04),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x05),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL1, 0xff),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL2, 0x00),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xda),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0xff),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0c),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE1, 0x98),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE1, 0x06),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE1, 0x16),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE1, 0x36),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE1, 0xc1),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE1, 0x00),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE1, 0x32),
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE1, 0x0f),
+
+       /* Rate B */
+       QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_tx_tbl[] = {
+       QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = {
+       QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24),
+       QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f),
+       QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+       QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
+       QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+       QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b),
+       QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+       QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+       QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d),
+       QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
+       QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
+       QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04),
+       QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+       QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81),
+       QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = {
+       QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_DOWN_CONTROL, 0x01),
+       QMP_PHY_INIT_CFG(QPHY_V3_PCS_MULTI_LANE_CTRL1, 0x02),
+};
+
 /* struct qmp_phy_cfg - per-PHY initialization config */
 struct qmp_phy_cfg {
        /* phy-type - PCIE/UFS/USB */
@@ -540,6 +613,9 @@ struct qmp_phy_cfg {
        /* Register offset of secondary tx/rx lanes for USB DP combo PHY */
        unsigned int tx_b_lane_offset;
        unsigned int rx_b_lane_offset;
+
+       /* true, if PCS block has a separate SW_RESET register */
+       bool has_sw_rst;
 };

 /**
@@ -636,6 +712,10 @@ static inline void qphy_clrbits(void __iomem
*base, u32 offset, u32 val)
        "aux", "cfg_ahb", "ref", "com_aux",
 };

+static const char * const sdm845_ufs_phy_clk_l[] = {
+       "ref_clk", "ref_aux_clk",
+};
+
 /* list of resets */
 static const char * const msm8996_pciephy_reset_l[] = {
        "phy", "common", "cfg",
@@ -650,6 +730,10 @@ static inline void qphy_clrbits(void __iomem
*base, u32 offset, u32 val)
        "vdda-phy", "vdda-pll",
 };

+static const char * const sdm845_phy_vreg_l[] = {
+       "vdda-phy", "vdda-pll",
+};
+
 static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
        .type                   = PHY_TYPE_PCIE,
        .nlanes                 = 3,
@@ -679,6 +763,7 @@ static inline void qphy_clrbits(void __iomem
*base, u32 offset, u32 val)
        .has_pwrdn_delay        = true,
        .pwrdn_delay_min        = POWER_DOWN_DELAY_US_MIN,
        .pwrdn_delay_max        = POWER_DOWN_DELAY_US_MAX,
+       .has_sw_rst             = true,
 };

 static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
@@ -704,6 +789,7 @@ static inline void qphy_clrbits(void __iomem
*base, u32 offset, u32 val)
        .start_ctrl             = SERDES_START | PCS_START,
        .pwrdn_ctrl             = SW_PWRDN,
        .mask_pcs_ready         = PHYSTATUS,
+       .has_sw_rst             = true,
 };

 /* list of resets */
@@ -740,6 +826,7 @@ static inline void qphy_clrbits(void __iomem
*base, u32 offset, u32 val)
        .has_pwrdn_delay        = true,
        .pwrdn_delay_min        = 995,          /* us */
        .pwrdn_delay_max        = 1005,         /* us */
+       .has_sw_rst             = true,
 };

 static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
@@ -772,6 +859,30 @@ static inline void qphy_clrbits(void __iomem
*base, u32 offset, u32 val)
        .has_phy_dp_com_ctrl    = true,
        .tx_b_lane_offset       = 0x400,
        .rx_b_lane_offset       = 0x400,
+       .has_sw_rst             = true,
+};
+
+static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
+       .type                   = PHY_TYPE_UFS,
+       .nlanes                 = 2,
+
+       .serdes_tbl             = sdm845_ufsphy_serdes_tbl,
+       .serdes_tbl_num         = ARRAY_SIZE(sdm845_ufsphy_serdes_tbl),
+       .tx_tbl                 = sdm845_ufsphy_tx_tbl,
+       .tx_tbl_num             = ARRAY_SIZE(sdm845_ufsphy_tx_tbl),
+       .rx_tbl                 = sdm845_ufsphy_rx_tbl,
+       .rx_tbl_num             = ARRAY_SIZE(sdm845_ufsphy_rx_tbl),
+       .pcs_tbl                = sdm845_ufsphy_pcs_tbl,
+       .pcs_tbl_num            = ARRAY_SIZE(sdm845_ufsphy_pcs_tbl),
+       .clk_list               = sdm845_ufs_phy_clk_l,
+       .num_clks               = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+       .vreg_list              = sdm845_phy_vreg_l,
+       .num_vregs              = ARRAY_SIZE(sdm845_phy_vreg_l),
+       .regs                   = sdm845_ufsphy_regs_layout,
+
+       .start_ctrl             = SERDES_START,
+       .pwrdn_ctrl             = SW_PWRDN,
+       .mask_pcs_ready         = PCS_READY,
 };

 static void qcom_qmp_phy_configure(void __iomem *base,
@@ -998,7 +1109,8 @@ static int qcom_qmp_phy_init(struct phy *phy)
                usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);

        /* Pull PHY out of reset state */
-       qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+       if (cfg->has_sw_rst)
+               qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
        if (cfg->has_phy_dp_com_ctrl)
                qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);

@@ -1036,7 +1148,8 @@ static int qcom_qmp_phy_exit(struct phy *phy)
        clk_disable_unprepare(qphy->pipe_clk);

        /* PHY reset */
-       qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+       if (cfg->has_sw_rst)
+               qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);

        /* stop SerDes and Phy-Coding-Sublayer */
        qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
@@ -1383,6 +1496,9 @@ int qcom_qmp_phy_create(struct device *dev,
struct device_node *np, int id)
        }, {
                .compatible = "qcom,qmp-v3-usb3-phy",
                .data = &qmp_v3_usb3phy_cfg,
+       }, {
+               .compatible = "qcom,sdm845-qmp-ufs-phy",
+               .data = &sdm845_ufsphy_cfg,
        },
        { },
 };
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h
b/drivers/phy/qualcomm/phy-qcom-qmp.h
index d1c6905..ea4b4dc 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -184,6 +184,8 @@
 #define QSERDES_V3_COM_VCO_TUNE2_MODE0                 0x0f8
 #define QSERDES_V3_COM_VCO_TUNE1_MODE1                 0x0fc
 #define QSERDES_V3_COM_VCO_TUNE2_MODE1                 0x100
+#define QSERDES_V3_COM_VCO_TUNE_INITVAL1               0x104
+#define QSERDES_V3_COM_VCO_TUNE_INITVAL2               0x108
 #define QSERDES_V3_COM_VCO_TUNE_TIMER1                 0x11c
 #define QSERDES_V3_COM_VCO_TUNE_TIMER2                 0x120
 #define QSERDES_V3_COM_CLK_SELECT                      0x138
@@ -211,8 +213,13 @@
 /* Only for QMP V3 PHY - RX registers */
 #define QSERDES_V3_RX_UCDR_SO_GAIN_HALF                        0x00c
 #define QSERDES_V3_RX_UCDR_SO_GAIN                     0x014
+#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF            0x024
+#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER         0x028
+#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN                 0x02c
 #define QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN            0x030
 #define QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE    0x034
+#define QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW          0x03c
+#define QSERDES_V3_RX_UCDR_PI_CONTROLS                 0x044
 #define QSERDES_V3_RX_RX_TERM_BW                       0x07c
 #define QSERDES_V3_RX_RX_EQ_GAIN2_LSB                  0x0c8
 #define QSERDES_V3_RX_RX_EQ_GAIN2_MSB                  0x0cc
@@ -272,6 +279,7 @@
 #define QPHY_V3_PCS_FLL_CNT_VAL_L                      0x0cc
 #define QPHY_V3_PCS_FLL_CNT_VAL_H_TOL                  0x0d0
 #define QPHY_V3_PCS_FLL_MAN_CODE                       0x0d4
+#define QPHY_V3_PCS_MULTI_LANE_CTRL1                   0x1c4
 #define QPHY_V3_PCS_RX_SIGDET_LVL                      0x1d8

 /* Only for QMP V3 PHY - PCS_MISC registers */

Reply via email to