From: Andy Gospodarek <[EMAIL PROTECTED]>
I've been seeing lots of messages like these:
eth0: No interrupt was generated using MSI, switching to INTx mode. Please
report this failure to the PCI maintainer and include system chipset
information.
On several systems that use the following Severworks HT1000 (also sometimes
labeled as a Broadcom chipset as well) bridge chips. It doesn't appear MSI
works well (if at all) on these systems.
Signed-off-by: Andy Gospodarek <[EMAIL PROTECTED]>
Cc: "Eric W. Biederman" <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
Signed-off-by: Greg Kroah-Hartman <[EMAIL PROTECTED]>
---
drivers/pci/quirks.c | 1 +
include/linux/pci_ids.h | 1 +
2 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 1cff65f..4937982 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1637,6 +1637,7 @@ static void __init quirk_disable_all_msi(struct pci_dev
*dev)
printk(KERN_WARNING "PCI: MSI quirk detected. MSI deactivated.\n");
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS,
PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS,
PCI_DEVICE_ID_SERVERWORKS_HT1000_PCIX, quirk_disable_all_msi);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200,
quirk_disable_all_msi);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480,
quirk_disable_all_msi);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 4712e26..c4a14c6 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1437,6 +1437,7 @@
#define PCI_DEVICE_ID_SERVERWORKS_LE 0x0009
#define PCI_DEVICE_ID_SERVERWORKS_GCNB_LE 0x0017
#define PCI_DEVICE_ID_SERVERWORKS_EPB 0x0103
+#define PCI_DEVICE_ID_SERVERWORKS_HT1000_PCIX 0x0104
#define PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE 0x0132
#define PCI_DEVICE_ID_SERVERWORKS_OSB4 0x0200
#define PCI_DEVICE_ID_SERVERWORKS_CSB5 0x0201
--
1.5.2
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
