Hi, On Fri, Mar 23, 2018 at 11:09:30AM +0100, Pavel Machek wrote: > Hi! > > > > # CONFIG_SND_OMAP_SOC_RX51 is not set > > > # CONFIG_SND_OMAP_SOC_N9 is not set > > > CONFIG_SND_OMAP_SOC_OMAP_TWL4030=y > > > CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=y > > > > That's not needed (but does not hurt). The Droid 4 > > has no TWL companion chip and uses CPCAP instead. > > Aha, thanks. I was doing wild experiments to get something that > boots... I turned them off. > > > > Any ideas? > > > > You probably did not enable the soundcard driver, that binds against > > "audio-graph-card" compatible and connects the codec driver with the > > SoC driver: CONFIG_SND_AUDIO_GRAPH_CARD > > Ok, that certainly changed things; I am now getting this: > > Mar 23 08:39:17 devuan kernel: [ 11.633605] asoc-audio-graph-card > soundcard: GPIO lookup for > consumer pa > Mar 23 08:39:17 devuan kernel: [ 11.644958] asoc-audio-graph-card > soundcard: using device tr > ee for GPIO lookup > Mar 23 08:39:17 devuan kernel: [ 11.656677] of_get_named_gpiod_flags: can't > parse 'pa-gpios' > property of node '/soundcard[0]' > Mar 23 08:39:17 devuan kernel: [ 11.669738] of_get_named_gpiod_flags: can't > parse 'pa-gpio' > property of node '/soundcard[0]' > Mar 23 08:39:17 devuan kernel: [ 11.682617] asoc-audio-graph-card > soundcard: using lookup ta > bles for GPIO lookup > Mar 23 08:39:17 devuan kernel: [ 11.694427] asoc-audio-graph-card > soundcard: lookup for GPIO > pa failed
That's not an error, but just some debug messages. Consider
disabling CONFIG_DEBUG_GPIO to get rid of them.
> Indeed the dts does not seem to contain any gpios
It's optional and does not exist on Droid 4.
> soundcard {
> compatible = "audio-graph-card";
> label = "Droid 4 Audio";
>
> simple-graph-card,widgets =
> "Speaker", "Earpiece",
> "Speaker", "Loudspeaker",
> "Headphone", "Headphone Jack",
> "Microphone", "Internal Mic";
>
> simple-graph-card,routing =
> "Earpiece", "EP",
> "Loudspeaker", "SPKR",
> "Headphone Jack", "HSL",
> "Headphone Jack", "HSR",
> "MICR", "Internal Mic";
>
> dais = <&mcbsp2_port>, <&mcbsp3_port>;
> };
>
> Any more ideas? :-)
Make sure, that the device was not proped properly (cat
/proc/asound/cards) and post the real error? :)
-- Sebastian
signature.asc
Description: PGP signature
