vbat_sns is needed to estimate a fairly accurate on chip voltage
and bat_therm is needed to produce an accurate percentage
from the estimated ocv.
Signed-off-by: Craig Tatlor <ctatlo...@gmail.com>
---
arch/arm/boot/dts/qcom-pm8941.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi
b/arch/arm/boot/dts/qcom-pm8941.dtsi
index 1d5ef55c7ee5..2515c5c217ac 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -139,6 +139,9 @@
#size-cells = <0>;
#io-channel-cells = <1>;
+ bat_temp {
+ reg = <VADC_LR_MUX1_BAT_THERM>;
+ };
die_temp {
reg = <VADC_DIE_TEMP>;
};
@@ -154,6 +157,9 @@
ref_vdd {
reg = <VADC_VDD_VADC>;
};
+ vbat_sns {
+ reg = <VADC_VBAT_SNS>;
+ };
};
pm8941_iadc: iadc@3600 {
--
2.16.2
