On Wed, 28 Mar 2018, Enric Balletbo i Serra wrote: > Before this patch the enable signal was set before the PWM signal and > vice-versa on power off. This sequence is wrong, at least, it is on > the different panels datasheets that I checked, so I inverted the sequence > to follow the specs. > > For reference the following panels have the mentioned sequence: > - N133HSE-EA1 (Innolux) > - N116BGE (Innolux) > - N156BGE-L21 (Innolux) > - B101EAN0 (Auo) > - B101AW03 (Auo) > - LTN101NT05 (Samsung) > - CLAA101WA01A (Chunghwa) > > Signed-off-by: Enric Balletbo i Serra <enric.balle...@collabora.com> > Acked-by: Daniel Thompson <daniel.thomp...@linaro.org> > Acked-by: Jingoo Han <jingooh...@gmail.com> > Acked-by: Thierry Reding <thierry.red...@gmail.com> > --- > Changes since v5: > - Add Acked-by: Thierry Reding <thierry.red...@gmail.com> > Changes since v4: > - Rebase on top of mainline. > - Add the acks from Daniel Thompson and Jingoo Han. > Changes since v3: > - List the part numbers for the panel checked (Daniel Thompson) > Changes since v2: > - Add this as a separate patch (Thierry Reding) > Changes since v1: > - None > --- > drivers/video/backlight/pwm_bl.c | 9 +++++---- > 1 file changed, 5 insertions(+), 4 deletions(-)
Applied, thanks. -- Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog