Hi! This driver implements support for voltage dividers and current sense circuits. It's pretty generic and should be easily adaptable to other linear scaling purposes...
The driver is still named "unit converter", because it was not clear to me that there was a real problem with the driver being named that. I got the impression that the naming discussion in v1 was mainly about the category, and that it kind of looked odd and non-specific with unit-converter in the DT bindings, but what do I know? Cheers, Peter Changes since v1: https://lkml.org/lkml/2018/3/19/801 - Put the driver in the new afe category (Analog Front Ends) and do not move the iio-mux driver. - Do not refer to the source channel as "parent", use "source" instead. - Have the DT compatible drive the target unit, instead of relying on a "type" DT-property for that. - In the DT bindings, use an unnamed source channel. - Do not set up writes to _RAW (sorry Phil) as I don't need it and have not tested it. It's easy to add back if needed. - Fail if the source channel does not support _RAW or _SCALE. - Fix various spelling issues. - Fix various code style issues. Peter Rosin (2): dt-bindings: iio: afe: add current-sense-cuicuit and voltage-divider iio: afe: unit-converter: new driver .../bindings/iio/afe/current-sense-circuit.txt | 45 ++++ .../bindings/iio/afe/voltage-divider.txt | 45 ++++ MAINTAINERS | 8 + drivers/iio/Kconfig | 1 + drivers/iio/Makefile | 1 + drivers/iio/afe/Kconfig | 18 ++ drivers/iio/afe/Makefile | 6 + drivers/iio/afe/iio-unit-converter.c | 257 +++++++++++++++++++++ 8 files changed, 381 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/afe/current-sense-circuit.txt create mode 100644 Documentation/devicetree/bindings/iio/afe/voltage-divider.txt create mode 100644 drivers/iio/afe/Kconfig create mode 100644 drivers/iio/afe/Makefile create mode 100644 drivers/iio/afe/iio-unit-converter.c -- 2.11.0
