On 3/10/2018 7:54 AM, srinivas.kandaga...@linaro.org wrote:
From: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
This patch adds support to open, write and media format commands
in the q6asm module.
Signed-off-by: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
Reviewed-and-Tested-by: Rohit kumar <rohi...@codeaurora.org>
---
sound/soc/qcom/qdsp6/q6asm.c | 744 ++++++++++++++++++++++++++++++++++++++++++-
sound/soc/qcom/qdsp6/q6asm.h | 49 +++
2 files changed, 792 insertions(+), 1 deletion(-)
diff --git a/sound/soc/qcom/qdsp6/q6asm.c b/sound/soc/qcom/qdsp6/q6asm.c
index 8a2ca2ff9ce8..ddbf526358bd 100644
--- a/sound/soc/qcom/qdsp6/q6asm.c
+++ b/sound/soc/qcom/qdsp6/q6asm.c
@@ -9,6 +9,8 @@
#include <linux/device.h>
#include <linux/spinlock.h>
#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <uapi/sound/asound.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/mm.h>
@@ -17,10 +19,36 @@
#include "q6dsp-errno.h"
#include "q6dsp-common.h"
+#define ASM_STREAM_CMD_CLOSE 0x00010BCD
+#define ASM_STREAM_CMD_FLUSH 0x00010BCE
+#define ASM_SESSION_CMD_PAUSE 0x00010BD3
+#define ASM_DATA_CMD_EOS 0x00010BDB
+#define ASM_DEFAULT_POPP_TOPOLOGY 0x00010BE4
Use NULL topology instead of default topology.
#define ASM_NULL_POPP_TOPOLOGY 0x00010C68
+#define ASM_STREAM_CMD_FLUSH_READBUFS 0x00010C09
+#define ASM_STREAM_CMD_SET_ENCDEC_PARAM 0x00010C10
[..]
+ q6asm_add_hdr(ac, &open.hdr, sizeof(open), true, ac->stream_id);
+
+ open.hdr.opcode = ASM_STREAM_CMD_OPEN_WRITE_V3;
+ open.mode_flags = 0x00;
+ open.mode_flags |= ASM_LEGACY_STREAM_SESSION;
+
+ /* source endpoint : matrix */
+ open.sink_endpointype = ASM_END_POINT_DEVICE_MATRIX;
+ open.bits_per_sample = bits_per_sample;
+ open.postprocopo_id = ASM_DEFAULT_POPP_TOPOLOGY;
open.postprocopo_id = ASM_NULL_POPP_TOPOLOGY;
+
+ switch (format) {
+ case FORMAT_LINEAR_PCM:
+ open.dec_fmt_id = ASM_MEDIA_FMT_MULTI_CHANNEL_PCM_V2;
+ break;
+ default:
+ dev_err(ac->dev, "Invalid format 0x%x\n", format);
+ return -EINVAL;
+ }
+
+ rc = q6asm_ac_send_cmd_sync(ac, &open);
+ if (rc < 0)
+ return rc;
+
+ ac->io_mode |= ASM_TUN_WRITE_IO_MODE;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(q6asm_open_write);
