Add the RPMh clock driver to control the RPMh managed clock resources on
some of the Qualcomm Technologies, Inc. SoCs.
Signed-off-by: David Collins <colli...@codeaurora.org>
Signed-off-by: Amit Nischal <anisc...@codeaurora.org>
---
drivers/clk/qcom/Kconfig | 9 ++
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/clk-rpmh.c | 367 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 377 insertions(+)
create mode 100644 drivers/clk/qcom/clk-rpmh.c
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index fbf4532..63c3372 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -112,6 +112,15 @@ config IPQ_GCC_8074
i2c, USB, SD/eMMC, etc. Select this for the root clock
of ipq8074.
+config QCOM_CLK_RPMH
+ tristate "RPMh Clock Driver"
+ depends on COMMON_CLK_QCOM && QCOM_RPMH
+ help
+ RPMh manages shared resources on some Qualcomm Technologies, Inc.
+ SoCs. It accepts requests from other hardware subsystems via RSC.
+ Say Y if you want to support the clocks exposed by RPMh on
+ platforms such as sdm845.
+
config MSM_GCC_8660
tristate "MSM8660 Global Clock Controller"
depends on COMMON_CLK_QCOM
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 230332c..b2b5babf 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -36,5 +36,6 @@ obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o
obj-$(CONFIG_QCOM_A53PLL) += a53-pll.o
obj-$(CONFIG_QCOM_CLK_APCS_MSM8916) += apcs-msm8916.o
obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
+obj-$(CONFIG_QCOM_CLK_RPMH) += clk-rpmh.o
obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
new file mode 100644
index 0000000..fa61284
--- /dev/null
+++ b/drivers/clk/qcom/clk-rpmh.c
@@ -0,0 +1,367 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <soc/qcom/cmd-db.h>
+#include <soc/qcom/rpmh.h>
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+
+#define CLK_RPMH_ARC_EN_OFFSET 0
+#define CLK_RPMH_VRM_EN_OFFSET 4
+#define CLK_RPMH_APPS_RSC_AO_STATE_MASK (BIT(RPMH_WAKE_ONLY_STATE) | \
+ BIT(RPMH_ACTIVE_ONLY_STATE))
+#define CLK_RPMH_APPS_RSC_STATE_MASK (BIT(RPMH_WAKE_ONLY_STATE) | \
+ BIT(RPMH_ACTIVE_ONLY_STATE) | \
+ BIT(RPMH_SLEEP_STATE))
+struct clk_rpmh {
+ struct clk_hw hw;
+ const char *res_name;
+ u32 res_addr;
+ u32 res_en_offset;
+ u32 res_on_val;
+ u32 res_off_val;
+ u32 state;
+ u32 aggr_state;
+ u32 last_sent_aggr_state;
+ u32 valid_state_mask;
+ struct rpmh_client *rpmh_client;
+ struct device *dev;
+ struct clk_rpmh *peer;
+ unsigned long rate;
+};
+
+struct rpmh_cc {
+ struct clk_onecell_data data;
+ struct clk *clks[];
+};
+
+struct clk_rpmh_desc {
+ struct clk_hw **clks;
+ size_t num_clks;
+};
+
+static DEFINE_MUTEX(rpmh_clk_lock);
+
+#define __DEFINE_CLK_RPMH(_platform, _name, _name_active, _res_name, \
+ _res_en_offset, _res_on, _res_off, _rate) \
+ static struct clk_rpmh _platform##_##_name_active; \
+ static struct clk_rpmh _platform##_##_name = { \
+ .res_name = _res_name, \
+ .res_en_offset = _res_en_offset, \
+ .res_on_val = _res_on, \
+ .res_off_val = _res_off, \
+ .rate = _rate, \
+ .peer = &_platform##_##_name_active, \
+ .valid_state_mask = CLK_RPMH_APPS_RSC_STATE_MASK, \
+ .hw.init = &(struct clk_init_data){ \
+ .ops = &clk_rpmh_ops, \
+ .name = #_name, \
+ }, \
+ }; \
+ static struct clk_rpmh _platform##_##_name_active = { \
+ .res_name = _res_name, \
+ .res_en_offset = _res_en_offset, \
+ .res_on_val = _res_on, \
+ .res_off_val = _res_off, \
+ .rate = _rate, \
+ .peer = &_platform##_##_name, \
+ .valid_state_mask = CLK_RPMH_APPS_RSC_AO_STATE_MASK, \
+ .hw.init = &(struct clk_init_data){ \
+ .ops = &clk_rpmh_ops, \
+ .name = #_name_active, \
+ }, \
+ }
+
+#define DEFINE_CLK_RPMH_ARC(_platform, _name, _name_active, _res_name, \
+ _res_on, _res_off, _rate) \
+ __DEFINE_CLK_RPMH(_platform, _name, _name_active, _res_name, \
+ CLK_RPMH_ARC_EN_OFFSET, _res_on, _res_off, _rate)
+
+#define DEFINE_CLK_RPMH_VRM(_platform, _name, _name_active, _res_name, \
+ _rate) \
+ __DEFINE_CLK_RPMH(_platform, _name, _name_active, _res_name, \
+ CLK_RPMH_VRM_EN_OFFSET, true, false, _rate)
+
+static inline struct clk_rpmh *to_clk_rpmh(struct clk_hw *_hw)
+{
+ return container_of(_hw, struct clk_rpmh, hw);
+}
+
+static inline bool has_state_changed(struct clk_rpmh *c, u32 state)
+{
+ return ((c->last_sent_aggr_state & BIT(state))
+ != (c->aggr_state & BIT(state)));
+}
+
+static int clk_rpmh_send_aggregate_command(struct clk_rpmh *c)
+{
+ struct tcs_cmd cmd = { 0 };
+ u32 cmd_state, on_val;
+ enum rpmh_state state = RPMH_SLEEP_STATE;
+ int ret = 0;
+
+ cmd.addr = c->res_addr + c->res_en_offset;
+ cmd_state = c->aggr_state;
+ on_val = c->res_on_val;
+
+ for (; state <= RPMH_ACTIVE_ONLY_STATE; state++) {
+ if (has_state_changed(c, state)) {
+ cmd.data = (cmd_state & BIT(state)) ? on_val : 0;
+ ret = rpmh_write_async(c->rpmh_client, state,
+ &cmd, 1);
+ if (ret) {
+ dev_err(c->dev, "set %s state of %s failed:
(%d)\n",
+ (!state) ? "sleep" :
+ (state == RPMH_WAKE_ONLY_STATE) ?
+ "wake" : "active", c->res_name, ret);
+ return ret;
+ }
+ }
+ }
+
+ c->last_sent_aggr_state = c->aggr_state;
+ c->peer->last_sent_aggr_state = c->last_sent_aggr_state;
+
+ return 0;
+}
+
+static int clk_rpmh_aggregate_state_send_command(struct clk_rpmh *c,
+ bool enable)
+{
+ int ret;
+
+ /* Update state and aggregate state values based on enable value. */
+ c->state = enable ? c->valid_state_mask : 0;
+ c->aggr_state = c->state | c->peer->state;
+ c->peer->aggr_state = c->aggr_state;
+
+ ret = clk_rpmh_send_aggregate_command(c);
+ if (ret && enable) {
+ c->state = 0;
+ } else if (ret) {
+ c->state = c->valid_state_mask;
+ WARN(1, "clk: %s failed to disable\n", c->res_name);
+ }
+
+ return ret;
+}
+
+static int clk_rpmh_prepare(struct clk_hw *hw)
+{
+ struct clk_rpmh *c = to_clk_rpmh(hw);
+ int ret = 0;
+
+ mutex_lock(&rpmh_clk_lock);
+
+ if (c->state)
+ goto out;
+
+ ret = clk_rpmh_aggregate_state_send_command(c, true);
+out:
+ mutex_unlock(&rpmh_clk_lock);
+ return ret;
+};
+
+static void clk_rpmh_unprepare(struct clk_hw *hw)
+{
+ struct clk_rpmh *c = to_clk_rpmh(hw);
+
+ mutex_lock(&rpmh_clk_lock);
+
+ if (!c->state)
+ goto out;
+
+ clk_rpmh_aggregate_state_send_command(c, false);
+out:
+ mutex_unlock(&rpmh_clk_lock);
+ return;
+};
+
+static unsigned long clk_rpmh_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_rpmh *r = to_clk_rpmh(hw);
+
+ /*
+ * RPMh clocks have a fixed rate. Return static rate set
+ * at init time.
+ */
+ return r->rate;
+}
+
+static const struct clk_ops clk_rpmh_ops = {
+ .prepare = clk_rpmh_prepare,
+ .unprepare = clk_rpmh_unprepare,
+ .recalc_rate = clk_rpmh_recalc_rate,
+};
+
+/* Resource name must match resource id present in cmd-db. */
+DEFINE_CLK_RPMH_ARC(sdm845, bi_tcxo, bi_tcxo_ao, "xo.lvl", 0x3, 0x0, 19200000);
+DEFINE_CLK_RPMH_VRM(sdm845, ln_bb_clk2, ln_bb_clk2_ao, "lnbclka2", 19200000);
+DEFINE_CLK_RPMH_VRM(sdm845, ln_bb_clk3, ln_bb_clk3_ao, "lnbclka3", 19200000);
+DEFINE_CLK_RPMH_VRM(sdm845, rf_clk1, rf_clk1_ao, "rfclka1", 38400000);
+DEFINE_CLK_RPMH_VRM(sdm845, rf_clk2, rf_clk2_ao, "rfclka2", 38400000);
+DEFINE_CLK_RPMH_VRM(sdm845, rf_clk3, rf_clk3_ao, "rfclka3", 38400000);
+
+static struct clk_hw *sdm845_rpmh_clocks[] = {
+ [RPMH_CXO_CLK] = &sdm845_bi_tcxo.hw,
+ [RPMH_CXO_CLK_A] = &sdm845_bi_tcxo_ao.hw,
+ [RPMH_LN_BB_CLK2] = &sdm845_ln_bb_clk2.hw,
+ [RPMH_LN_BB_CLK2_A] = &sdm845_ln_bb_clk2_ao.hw,
+ [RPMH_LN_BB_CLK3] = &sdm845_ln_bb_clk3.hw,
+ [RPMH_LN_BB_CLK3_A] = &sdm845_ln_bb_clk3_ao.hw,
+ [RPMH_RF_CLK1] = &sdm845_rf_clk1.hw,
+ [RPMH_RF_CLK1_A] = &sdm845_rf_clk1_ao.hw,
+ [RPMH_RF_CLK2] = &sdm845_rf_clk2.hw,
+ [RPMH_RF_CLK2_A] = &sdm845_rf_clk2_ao.hw,
+ [RPMH_RF_CLK3] = &sdm845_rf_clk3.hw,
+ [RPMH_RF_CLK3_A] = &sdm845_rf_clk3_ao.hw,
+};
+
+static const struct clk_rpmh_desc clk_rpmh_sdm845 = {
+ .clks = sdm845_rpmh_clocks,
+ .num_clks = ARRAY_SIZE(sdm845_rpmh_clocks),
+};
+
+static int clk_rpmh_probe(struct platform_device *pdev)
+{
+ struct clk **clks;
+ struct clk *clk;
+ struct rpmh_cc *rcc;
+ struct clk_onecell_data *data;
+ struct clk_hw **hw_clks;
+ struct clk_rpmh *rpmh_clk;
+ const struct clk_rpmh_desc *desc;
+ struct rpmh_client *rpmh_client;
+ struct device *dev;
+ size_t num_clks, i;
+ int ret;
+
+ dev = &pdev->dev;
+
+ ret = cmd_db_ready();
+ if (ret) {
+ if (ret != -EPROBE_DEFER) {
+ dev_err(dev, "Command DB not available (%d)\n", ret);
+ goto fail;
+ }
+ return ret;
+ }
+
+ rpmh_client = rpmh_get_client(pdev);
+ if (IS_ERR(rpmh_client)) {
+ ret = PTR_ERR(rpmh_client);
+ dev_err(dev, "Failed to request RPMh client, ret=%d\n", ret);
+ return ret;
+ }
+
+ desc = of_device_get_match_data(&pdev->dev);
+ hw_clks = desc->clks;
+ num_clks = desc->num_clks;
+
+ rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc) + sizeof(*clks) * num_clks,
+ GFP_KERNEL);
+ if (!rcc) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ clks = rcc->clks;
+ data = &rcc->data;
+ data->clks = clks;
+ data->clk_num = num_clks;
+
+ for (i = 0; i < num_clks; i++) {
+ rpmh_clk = to_clk_rpmh(hw_clks[i]);
+ rpmh_clk->res_addr = cmd_db_read_addr(rpmh_clk->res_name);
+ if (!rpmh_clk->res_addr) {
+ dev_err(dev, "missing RPMh resource address for %s\n",
+ rpmh_clk->res_name);
+ ret = -ENODEV;
+ goto err;
+ }
+
+ rpmh_clk->rpmh_client = rpmh_client;
+
+ clk = devm_clk_register(&pdev->dev, hw_clks[i]);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ dev_err(dev, "failed to register %s\n",
+ hw_clks[i]->init->name);
+ goto err;
+ }
+
+ clks[i] = clk;
+ rpmh_clk->dev = &pdev->dev;
+ }
+
+ ret = of_clk_add_provider(pdev->dev.of_node, of_clk_src_onecell_get,
+ data);
+ if (ret) {
+ dev_err(dev, "Failed to add clock provider\n");
+ goto err;
+ }
+
+ dev_dbg(dev, "Registered RPMh clocks\n");
+
+ return 0;
+err:
+ if (rpmh_client)
+ rpmh_release(rpmh_client);
+fail:
+ dev_err(dev, "Error registering RPMh Clock driver (%d)\n", ret);
+ return ret;
+}
+
+static int clk_rpmh_remove(struct platform_device *pdev)
+{
+ const struct clk_rpmh_desc *desc =
+ of_device_get_match_data(&pdev->dev);
+ struct clk_hw **hw_clks = desc->clks;
+ struct clk_rpmh *rpmh_clk = to_clk_rpmh(hw_clks[0]);
+
+ rpmh_release(rpmh_clk->rpmh_client);
+ of_clk_del_provider(pdev->dev.of_node);
+
+ return 0;
+}
+
+static const struct of_device_id clk_rpmh_match_table[] = {
+ { .compatible = "qcom,sdm845-rpmh-clk", .data = &clk_rpmh_sdm845},
+ { }
+};
+MODULE_DEVICE_TABLE(of, clk_rpmh_match_table);
+
+static struct platform_driver clk_rpmh_driver = {
+ .probe = clk_rpmh_probe,
+ .remove = clk_rpmh_remove,
+ .driver = {
+ .name = "clk-rpmh",
+ .of_match_table = clk_rpmh_match_table,
+ },
+};
+
+static int __init clk_rpmh_init(void)
+{
+ return platform_driver_register(&clk_rpmh_driver);
+}
+subsys_initcall(clk_rpmh_init);
+
+static void __exit clk_rpmh_exit(void)
+{
+ platform_driver_unregister(&clk_rpmh_driver);
+}
+module_exit(clk_rpmh_exit);
+
+MODULE_DESCRIPTION("QCOM RPMh Clock Driver");
+MODULE_LICENSE("GPL v2");
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
