On Sun, Apr 15, 2018 at 12:37 PM, Jonathan Cameron <[email protected]> wrote:
> On Fri, 13 Apr 2018 13:36:48 -0300
> Hernán Gonzalez <[email protected]> wrote:
>
>> Cc: Rob Herring <[email protected]>
>> Cc: Mark Rutland <[email protected]>
>> Cc: [email protected]
>> Signed-off-by: Hernán Gonzalez <[email protected]>
> A few comments inline.
>
> Thanks,
>
> Jonathan
>
>> ---
>> .../devicetree/bindings/staging/iio/cdc/ad7746.txt | 34
>> ++++++++++++++++++++++
>> 1 file changed, 34 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/staging/iio/cdc/ad7746.txt
>>
>> diff --git a/Documentation/devicetree/bindings/staging/iio/cdc/ad7746.txt
>> b/Documentation/devicetree/bindings/staging/iio/cdc/ad7746.txt
>> new file mode 100644
>> index 0000000..7740f05
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/staging/iio/cdc/ad7746.txt
>> @@ -0,0 +1,34 @@
>> +Analog Devices AD7746/5/7 capacitive sensor driver
>> +
>> +Required properties:
>> + - compatible: Should be one of
>> + * "adi,ad7745"
>> + * "adi,ad7746"
>> + * "adi,ad7747"
>> + - reg: The 7-bits long I2c address of the device
>> +
>> +Optional properties:
>> + - adi,exclvl: This property defines the excitation voltage level for
>> the
>> + capacitance to be measured. Possible values are:
>> + * 0 = +-VDD/8
>> + * 1 = +-VDD/4
>> + * 2 = +-VDD * 3/8
>> + * 3 = +-VDD/2 (Default)
>> + - adi,nexca_en: Invert excitation output A.
>
> The naming is rather odd. Why _en?
>
Just sticking to the original pdata naming. I'll rename it on next series.
>> + - adi,nexcb_en: Invert excitation output B.
>> +
>> +Example:
>> +Here exclvl would be 1 (VDD/4), Excitation pin A would be inverted and
>> +Excitation pin B would NOT be inverted.
>> +
>> +i2c2 {
>> +
>> + < . . . >
> What does this spacer add to the example?
> Sure, there can be other devices, but no need to illustrate that here.
>
>> +
>> + ad7746: ad7746@60 {
>> + compatible = "ad7746";
>> + reg = <0x60>;
>> + adi,exclvl = <1>;
>> + adi,nexca_en;
>> + };
>> +};
>
