On errors reported from CPER, cper_print_bits() was used to log the
AER bits. This resulted in hard-to-understand messages, without a
prefix. Instead use __aer_print_error() for both native AER and CPER
to provide a more consistent log format.

Signed-off-by: Alexandru Gagniuc <mr.nuke...@gmail.com>
---
 drivers/pci/pcie/aer/aerdrv_errprint.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c 
b/drivers/pci/pcie/aer/aerdrv_errprint.c
index cfc89dd57831..cfae4d52f848 100644
--- a/drivers/pci/pcie/aer/aerdrv_errprint.c
+++ b/drivers/pci/pcie/aer/aerdrv_errprint.c
@@ -216,28 +216,30 @@ EXPORT_SYMBOL_GPL(cper_severity_to_aer);
 void cper_print_aer(struct pci_dev *dev, int aer_severity,
                    struct aer_capability_regs *aer)
 {
-       int layer, agent, status_strs_size, tlp_header_valid = 0;
+       int layer, agent, tlp_header_valid = 0;
        u32 status, mask;
-       const char **status_strs;
+       struct aer_err_info info;
 
        if (aer_severity == AER_CORRECTABLE) {
                status = aer->cor_status;
                mask = aer->cor_mask;
-               status_strs = aer_correctable_error_string;
-               status_strs_size = ARRAY_SIZE(aer_correctable_error_string);
        } else {
                status = aer->uncor_status;
                mask = aer->uncor_mask;
-               status_strs = aer_uncorrectable_error_string;
-               status_strs_size = ARRAY_SIZE(aer_uncorrectable_error_string);
                tlp_header_valid = status & AER_LOG_TLP_MASKS;
        }
 
        layer = AER_GET_LAYER_ERROR(aer_severity, status);
        agent = AER_GET_AGENT(aer_severity, status);
 
+       memset(&info, 0, sizeof(info));
+       info.severity = aer_severity;
+       info.status = status;
+       info.mask = mask;
+       info.first_error = 0x1f;
+
        pci_err(dev, "aer_status: 0x%08x, aer_mask: 0x%08x\n", status, mask);
-       cper_print_bits("", status, status_strs, status_strs_size);
+       __aer_print_error(dev, &info);
        pci_err(dev, "aer_layer=%s, aer_agent=%s\n",
                aer_error_layer[layer], aer_agent_string[agent]);
 
-- 
2.14.3

Reply via email to