The patch regulator: pfuze100: update voltage setting for pfuze3000 sw1a
has been applied to the regulator tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 1dced996ee702e6af82a57c7b6c56b0cceaa6425 Mon Sep 17 00:00:00 2001 From: Anson Huang <anson.hu...@nxp.com> Date: Sun, 18 Mar 2018 11:23:21 +0800 Subject: [PATCH] regulator: pfuze100: update voltage setting for pfuze3000 sw1a pfuze3000 datasheet(Rev.9.0) from: https://www.nxp.com/docs/en/data-sheet/PF3000.pdf updates sw1a's voltage range, the settings for 1.450V and 1.475V are replaced with 1.8V and 3.3V: 5b'11110 1.450 (SW1B), 1.8 (SW1A/SW1AB) 5b'11111 1.475 (SW1B), 3.3 (SW1A/SW1AB) the voltage calculation using steps is NOT available for sw1a now, use voltage table instead. Signed-off-by: Anson Huang <anson.hu...@nxp.com> Signed-off-by: Robin Gong <yibin.g...@nxp.com> Signed-off-by: Mark Brown <broo...@kernel.org> --- drivers/regulator/pfuze100-regulator.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index 63922a2167e5..680f076e3d85 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -86,6 +86,13 @@ static const int pfuze100_coin[] = { 2500000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000, 3300000, }; +static const int pfuze3000_sw1a[] = { + 700000, 725000, 750000, 775000, 800000, 825000, 850000, 875000, + 900000, 925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000, + 1100000, 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, + 1300000, 1325000, 1350000, 1375000, 1400000, 1425000, 1800000, 3300000, +}; + static const int pfuze3000_sw2lo[] = { 1500000, 1550000, 1600000, 1650000, 1700000, 1750000, 1800000, 1850000, }; @@ -343,7 +350,7 @@ static struct pfuze_regulator pfuze200_regulators[] = { }; static struct pfuze_regulator pfuze3000_regulators[] = { - PFUZE100_SW_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 700000, 1475000, 25000), + PFUZE100_SWB_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a), PFUZE100_SW_REG(PFUZE3000, SW1B, PFUZE100_SW1CVOL, 700000, 1475000, 25000), PFUZE100_SWB_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), PFUZE3000_SW3_REG(PFUZE3000, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000), -- 2.17.0
