Hi,
On Thu, Apr 19, 2018 at 05:32:22PM +0800, Chen-Yu Tsai wrote:
> From: Jonathan Liu <net...@gmail.com>
>
> The hardware supports dithering on TCON channel 0 which is used for LCD
> panels.
>
> Dithering is a method of approximating a color from a mixture of other
> colors when the required color isn't available. It reduces color
> banding artifacts that can be observed when displaying gradients
> (e.g. grayscale gradients). This may occur when the image that needs
> to be displayed is 24-bit but the LCD panel is a lower bit depth and
> does not perform dithering on its own.
>
> Signed-off-by: Jonathan Liu <net...@gmail.com>
> [w...@csie.org: check display_info.bpc first; handle LVDS and MIPI DSI]
> Signed-off-by: Chen-Yu Tsai <w...@csie.org>
> ---
>
> Hi Maxime,
>
> The dithering parameters used here are different from the ones you used
> in your MIPI DSI series. You might want to check if it still works for
> you.
>
> ---
> drivers/gpu/drm/sun4i/sun4i_tcon.c | 63 +++++++++++++++++++++++++++++-
> 1 file changed, 62 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> index 2bd53ef7d4b8..827518f4790e 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> @@ -12,6 +12,7 @@
>
> #include <drm/drmP.h>
> #include <drm/drm_atomic_helper.h>
> +#include <drm/drm_connector.h>
> #include <drm/drm_crtc.h>
> #include <drm/drm_crtc_helper.h>
> #include <drm/drm_encoder.h>
> @@ -276,8 +277,59 @@ static void sun4i_tcon0_mode_set_common(struct
> sun4i_tcon *tcon,
> SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
> }
>
> +static void sun4i_tcon0_mode_set_dithering(struct sun4i_tcon *tcon,
> + const struct drm_connector
> *connector)
> +{
> + u32 bus_format = 0;
> + u32 val = 0;
> +
> + /* XXX Would this ever happen? */
> + if (!connector)
> + return;
> +
> + /*
> + * FIXME: Undocumented bits
> + *
> + * The whole dithering process and these parameters are not
> + * explained in the vendor documents or BSP kernel code.
> + */
> + regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_PR_REG, 0x11111111);
> + regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_PG_REG, 0x11111111);
> + regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_PB_REG, 0x11111111);
> + regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_LR_REG, 0x11111111);
> + regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_LG_REG, 0x11111111);
> + regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_LB_REG, 0x11111111);
> + regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL0_REG, 0x01010000);
> + regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL1_REG, 0x15151111);
> + regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL2_REG, 0x57575555);
> + regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL3_REG, 0x7f7f7777);
> +
> + /* Do dithering if panel only supports 6 bits per color */
> + if (connector->display_info.bpc == 6)
> + val |= SUN4I_TCON0_FRM_CTL_EN;
> +
> + if (connector->display_info.num_bus_formats == 1)
> + bus_format = connector->display_info.bus_formats[0];
> +
> + /* Check the connection format */
> + switch (bus_format) {
> + case MEDIA_BUS_FMT_RGB565_1X16:
> + /* R and B components are only 5 bits deep */
> + val |= SUN4I_TCON0_FRM_CTL_MODE_R;
> + val |= SUN4I_TCON0_FRM_CTL_MODE_B;
> + case MEDIA_BUS_FMT_RGB666_1X18:
> + case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
> + /* Fall through: enable dithering */
> + val |= SUN4I_TCON0_FRM_CTL_EN;
> + break;
> + }
> +
> + /* Write dithering settings */
> + regmap_write(tcon->regs, SUN4I_TCON_FRM_CTL_REG, val);
> +}
> +
> static void sun4i_tcon0_mode_set_cpu(struct sun4i_tcon *tcon,
> - struct drm_encoder *encoder,
> + const struct drm_encoder *encoder,The whole serie looks good, but that should probbaly be part of the first patch? Maxime -- Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com
signature.asc
Description: PGP signature
