Remove the usage of IRQ_TYPE_NONE to fix loud warnings from patch (83a86fbb5b56b "irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE").
Signed-off-by: Thierry Escande <[email protected]> --- arch/arm/boot/dts/qcom-apq8064.dtsi | 52 ++++++++++++++++++------------------- 1 file changed, 26 insertions(+), 26 deletions(-) diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 5341a39c0392..f26613ffc9e7 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -444,7 +444,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x12450000 0x100>, <0x12400000 0x03>; - interrupts = <0 193 0x0>; + interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -456,7 +456,7 @@ pinctrl-1 = <&i2c1_pins_sleep>; pinctrl-names = "default", "sleep"; reg = <0x12460000 0x1000>; - interrupts = <0 194 IRQ_TYPE_NONE>; + interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; clock-names = "core", "iface"; #address-cells = <1>; @@ -484,7 +484,7 @@ pinctrl-0 = <&i2c2_pins>; pinctrl-1 = <&i2c2_pins_sleep>; pinctrl-names = "default", "sleep"; - interrupts = <0 196 IRQ_TYPE_NONE>; + interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; clock-names = "core", "iface"; #address-cells = <1>; @@ -508,7 +508,7 @@ pinctrl-1 = <&i2c3_pins_sleep>; pinctrl-names = "default", "sleep"; reg = <0x16280000 0x1000>; - interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>; clock-names = "core", "iface"; @@ -534,7 +534,7 @@ pinctrl-1 = <&i2c4_pins_sleep>; pinctrl-names = "default", "sleep"; reg = <0x16380000 0x1000>; - interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; clock-names = "core", "iface"; @@ -556,7 +556,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x1a240000 0x100>, <0x1a200000 0x03>; - interrupts = <0 154 0x0>; + interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -565,7 +565,7 @@ gsbi5_spi: spi@1a280000 { compatible = "qcom,spi-qup-v1.1.1"; reg = <0x1a280000 0x1000>; - interrupts = <0 155 0>; + interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; pinctrl-0 = <&spi5_default>; pinctrl-1 = <&spi5_sleep>; pinctrl-names = "default", "sleep"; @@ -592,7 +592,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16540000 0x100>, <0x16500000 0x03>; - interrupts = <0 156 0x0>; + interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -604,7 +604,7 @@ pinctrl-1 = <&i2c6_pins_sleep>; pinctrl-names = "default", "sleep"; reg = <0x16580000 0x1000>; - interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; clock-names = "core", "iface"; @@ -628,7 +628,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16640000 0x1000>, <0x16600000 0x1000>; - interrupts = <0 158 0x0>; + interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -640,7 +640,7 @@ pinctrl-1 = <&i2c7_pins_sleep>; pinctrl-names = "default", "sleep"; reg = <0x16680000 0x1000>; - interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>; clock-names = "core", "iface"; @@ -1056,7 +1056,7 @@ compatible = "qcom,apq8064-ahci", "generic-ahci"; status = "disabled"; reg = <0x29000000 0x180>; - interrupts = <GIC_SPI 209 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc SFAB_SATA_S_H_CLK>, <&gcc SATA_H_CLK>, @@ -1082,7 +1082,7 @@ sdcc1bam:dma@12402000{ compatible = "qcom,bam-v1.3.0"; reg = <0x12402000 0x8000>; - interrupts = <0 98 0>; + interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc SDC1_H_CLK>; clock-names = "bam_clk"; #dma-cells = <1>; @@ -1092,7 +1092,7 @@ sdcc3bam:dma@12182000{ compatible = "qcom,bam-v1.3.0"; reg = <0x12182000 0x8000>; - interrupts = <0 96 0>; + interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc SDC3_H_CLK>; clock-names = "bam_clk"; #dma-cells = <1>; @@ -1102,7 +1102,7 @@ sdcc4bam:dma@121c2000{ compatible = "qcom,bam-v1.3.0"; reg = <0x121c2000 0x8000>; - interrupts = <0 95 0>; + interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc SDC4_H_CLK>; clock-names = "bam_clk"; #dma-cells = <1>; @@ -1181,7 +1181,7 @@ compatible = "qcom,adreno-3xx"; reg = <0x04300000 0x20000>; reg-names = "kgsl_3d0_reg_memory"; - interrupts = <GIC_SPI 80 0>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "kgsl_3d0_irq"; clock-names = "core_clk", @@ -1281,7 +1281,7 @@ label = "MDSS DSI CTRL->0"; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 82 0>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; reg = <0x04700000 0x200>; reg-names = "dsi_ctrl"; @@ -1350,8 +1350,8 @@ <&mmcc MDP_AXI_CLK>; reg = <0x07500000 0x100000>; interrupts = - <GIC_SPI 63 0>, - <GIC_SPI 64 0>; + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; qcom,ncb = <2>; }; @@ -1366,8 +1366,8 @@ <&mmcc MDP_AXI_CLK>; reg = <0x07600000 0x100000>; interrupts = - <GIC_SPI 61 0>, - <GIC_SPI 62 0>; + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; qcom,ncb = <2>; }; @@ -1382,8 +1382,8 @@ <&mmcc GFX3D_AXI_CLK>; reg = <0x07c00000 0x100000>; interrupts = - <GIC_SPI 69 0>, - <GIC_SPI 70 0>; + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; qcom,ncb = <3>; }; @@ -1398,8 +1398,8 @@ <&mmcc GFX3D_AXI_CLK>; reg = <0x07d00000 0x100000>; interrupts = - <GIC_SPI 210 0>, - <GIC_SPI 211 0>; + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; qcom,ncb = <3>; }; @@ -1418,7 +1418,7 @@ #size-cells = <2>; ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */ 0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */ - interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; -- 2.14.1
