Clients such as HP, DPC are using pcie_wait_link_active(), which waits
till the link becomes active or inactive.

Made generic function and moved it to drivers/pci/pci.c

Signed-off-by: Oza Pawandeep <p...@codeaurora.org>

diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 18a42f8..e0c2b8e 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -231,25 +231,11 @@ bool pciehp_check_link_active(struct controller *ctrl)
        return ret;
 }
 
-static void __pcie_wait_link_active(struct controller *ctrl, bool active)
-{
-       int timeout = 1000;
-
-       if (pciehp_check_link_active(ctrl) == active)
-               return;
-       while (timeout > 0) {
-               msleep(10);
-               timeout -= 10;
-               if (pciehp_check_link_active(ctrl) == active)
-                       return;
-       }
-       ctrl_dbg(ctrl, "Data Link Layer Link Active not %s in 1000 msec\n",
-                       active ? "set" : "cleared");
-}
-
 static void pcie_wait_link_active(struct controller *ctrl)
 {
-       __pcie_wait_link_active(ctrl, true);
+       struct pci_dev *pdev = ctrl_dev(ctrl);
+
+       pcie_wait_for_link(pdev, true);
 }
 
 static bool pci_bus_check_dev(struct pci_bus *bus, int devfn)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index f6a4dd1..2bcf977 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -4176,6 +4176,36 @@ static int pci_pm_reset(struct pci_dev *dev, int probe)
        return 0;
 }
 
+/**
+ * pcie_wait_for_link - Wait for link till it's active/inactive
+ * @pdev: Bridge device
+ * @active: waiting for active or inactive ?
+ *
+ * Use this to wait till link becomes active or inactive.
+ */
+bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
+{
+       int timeout = 1000;
+       bool ret;
+       u16 lnk_status;
+
+       for (;;) {
+               pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
+               ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA);
+               if (ret == active)
+                       return true;
+               if (timeout <= 0)
+                       break;
+               msleep(10);
+               timeout -= 10;
+       }
+
+       pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n",
+                active ? "set" : "cleared");
+
+       return false;
+}
+
 void pci_reset_secondary_bus(struct pci_dev *dev)
 {
        u16 ctrl;
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index abc514e..5c44fbc 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -345,6 +345,8 @@ void pci_enable_acs(struct pci_dev *dev);
 /* PCI error reporting and recovery */
 void pcie_do_recovery(struct pci_dev *dev, int severity);
 
+bool pcie_wait_for_link(struct pci_dev *pdev, bool active);
+
 #ifdef CONFIG_PCIEASPM
 void pcie_aspm_init_link_state(struct pci_dev *pdev);
 void pcie_aspm_exit_link_state(struct pci_dev *pdev);
diff --git a/drivers/pci/pcie/pcie-dpc.c b/drivers/pci/pcie/pcie-dpc.c
index ad02298..6baed85 100644
--- a/drivers/pci/pcie/pcie-dpc.c
+++ b/drivers/pci/pcie/pcie-dpc.c
@@ -68,19 +68,9 @@ static int dpc_wait_rp_inactive(struct dpc_dev *dpc)
 
 static void dpc_wait_link_inactive(struct dpc_dev *dpc)
 {
-       unsigned long timeout = jiffies + HZ;
        struct pci_dev *pdev = dpc->dev->port;
-       struct device *dev = &dpc->dev->device;
-       u16 lnk_status;
 
-       pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
-       while (lnk_status & PCI_EXP_LNKSTA_DLLLA &&
-                                       !time_after(jiffies, timeout)) {
-               msleep(10);
-               pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
-       }
-       if (lnk_status & PCI_EXP_LNKSTA_DLLLA)
-               dev_warn(dev, "Link state not disabled for DPC event\n");
+       pcie_wait_for_link(pdev, false);
 }
 
 /**
-- 
2.7.4

Reply via email to