On Tue, Apr 24, 2018 at 12:06:44PM +0800, xsw...@marvell.com wrote:
> From: Evan Wang <xsw...@marvell.com>
>
> Marvell armada37xx, armada7k and armada8k share the same
> AHCI sata controller IP, and currently there is an issue
> (Errata Ref#226)that the SATA can not be detected via SATA
> Port-MultiPlayer(PMP). After debugging, the reason is
> found that the value of Port-x FIS-based Switching Control
> (PxFBS@0x40) became wrong.
> According to design, the bits[11:8, 0] of register PxFBS
> are cleared when Port Command and Status (0x18) bit[0]
> changes its value from 1 to 0, i.e. falling edge of Port
> Command and Status bit[0] sends PULSE that resets PxFBS
> bits[11:8; 0].
> So it needs save the port PxFBS register before PxCMD
> ST write and restore the port PxFBS register afterwards
> in ahci_stop_engine().
>
> This commit allows drivers to override ahci_stop_engine
> behavior for use by the Marvell AHCI driver(and potentially
> other drivers in the future).
>
> Signed-off-by: Evan Wang <xsw...@marvell.com>
> Suggested-by: Ofer Heifetz <of...@marvell.com>
> Cc: Tejun Heo <t...@kernel.org>
> Cc: Thomas Petazzoni <thomas.petazz...@bootlin.com>
> ---
> drivers/ata/ahci.c | 6 +++---
> drivers/ata/ahci.h | 7 +++++++
> drivers/ata/ahci_qoriq.c | 2 +-
> drivers/ata/ahci_xgene.c | 4 ++--
> drivers/ata/libahci.c | 20 ++++++++++++--------
> drivers/ata/sata_highbank.c | 2 +-
> 6 files changed, 26 insertions(+), 15 deletions(-)
<formletter>
This is not the correct way to submit patches for inclusion in the
stable kernel tree. Please read:
https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
for how to do this properly.
</formletter>
