[PATCH] net: wireless: ti: wlcore: sdio: allow pm to handle sdio power

[Eyal Reizer]

pm_runtime handles sdio power on and power off transitions.
An old workaround for trying to control the power explicitly from the
driver was in fact causing failures on suspend/resume as the mmc layer
already power the module on resume.

In case of resume pm_runtime_get sync returns a positive device's usage
count causing the driver to try an re-initialize an already initialized
device. This was causing sdio bus failure on resume.

Remove this manual power on/off sequence as it is in-fact not needed.

Signed-off-by: Eyal Reizer <ey...@ti.com>
Cc: sta...@vger.kernel.org
---
 drivers/net/wireless/ti/wlcore/sdio.c | 27 ++++++---------------------
 1 file changed, 6 insertions(+), 21 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/sdio.c 
b/drivers/net/wireless/ti/wlcore/sdio.c
index 1f727ba..6dbe61d 100644
--- a/drivers/net/wireless/ti/wlcore/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -155,17 +155,11 @@ static int wl12xx_sdio_power_on(struct wl12xx_sdio_glue 
*glue)
        struct mmc_card *card = func->card;
 
        ret = pm_runtime_get_sync(&card->dev);
-       if (ret) {
-               /*
-                * Runtime PM might be temporarily disabled, or the device
-                * might have a positive reference counter. Make sure it is
-                * really powered on.
-                */
-               ret = mmc_power_restore_host(card->host);
-               if (ret < 0) {
-                       pm_runtime_put_sync(&card->dev);
-                       goto out;
-               }
+       if (ret < 0) {
+               pm_runtime_put_noidle(&card->dev);
+               dev_err(glue->dev, "%s: failed to get_sync(%d)\n",
+                       __func__, ret);
+               goto out;
        }
 
        sdio_claim_host(func);
@@ -178,7 +172,6 @@ static int wl12xx_sdio_power_on(struct wl12xx_sdio_glue 
*glue)
 
 static int wl12xx_sdio_power_off(struct wl12xx_sdio_glue *glue)
 {
-       int ret;
        struct sdio_func *func = dev_to_sdio_func(glue->dev);
        struct mmc_card *card = func->card;
 
@@ -186,16 +179,8 @@ static int wl12xx_sdio_power_off(struct wl12xx_sdio_glue 
*glue)
        sdio_disable_func(func);
        sdio_release_host(func);
 
-       /* Power off the card manually in case it wasn't powered off above */
-       ret = mmc_power_save_host(card->host);
-       if (ret < 0)
-               goto out;
-
        /* Let runtime PM know the card is powered off */
-       pm_runtime_put_sync(&card->dev);
-
-out:
-       return ret;
+       return pm_runtime_put_sync(&card->dev);
 }
 
 static int wl12xx_sdio_set_power(struct device *child, bool enable)
-- 
2.7.4