On Wed, 2018-04-25 at 20:38 +0530, Sibi Sankar wrote:
> Add reset controller driver for Qualcomm SDM845 SoC to
> control reset signals provided by AOSS for Modem, Venus
> ADSP, GPU, Camera, Wireless, Display subsystem
>
> Signed-off-by: Sibi Sankar <si...@codeaurora.org>
> ---
> drivers/reset/Kconfig | 9 +++
> drivers/reset/Makefile | 1 +
> drivers/reset/reset-qcom-aoss.c | 133 ++++++++++++++++++++++++++++++++
> 3 files changed, 143 insertions(+)
> create mode 100644 drivers/reset/reset-qcom-aoss.c
>
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index c0b292be1b72..756ad2b27d0f 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -82,6 +82,15 @@ config RESET_PISTACHIO
> help
> This enables the reset driver for ImgTec Pistachio SoCs.
>
> +config RESET_QCOM_AOSS
> + bool "Qcom AOSS Reset Driver"
> + depends on ARCH_QCOM || COMPILE_TEST
> + help
> + This enables the AOSS (always on subsystem) reset driver
> + for Qualcomm SDM845 SoCs. Say Y if you want to control
> + reset signals provided by AOSS for Modem, Venus, ADSP,
> + GPU, Camera, Wireless, Display subsystem. Otherwise, say N.
> +
> config RESET_SIMPLE
> bool "Simple Reset Controller Driver" if COMPILE_TEST
> default ARCH_SOCFPGA || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI ||
> ARCH_ZX || ARCH_ASPEED
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index c1261dcfe9ad..6881e4d287f0 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -14,6 +14,7 @@ obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
> obj-$(CONFIG_RESET_MESON) += reset-meson.o
> obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
> obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
> +obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
> obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
> obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o
> obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
> diff --git a/drivers/reset/reset-qcom-aoss.c b/drivers/reset/reset-qcom-aoss.c
> new file mode 100644
> index 000000000000..3b0bbb387f7b
> --- /dev/null
> +++ b/drivers/reset/reset-qcom-aoss.c
> @@ -0,0 +1,133 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2018 The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/of_device.h>
> +#include <dt-bindings/reset/qcom,sdm845-aoss.h>
> +
> +struct qcom_aoss_reset_map {
> + unsigned int reg;
> +};
> +
> +struct qcom_aoss_desc {
> + const struct qcom_aoss_reset_map *resets;
> + size_t num_resets;
> +};
> +
> +struct qcom_aoss_reset_data {
> + struct reset_controller_dev rcdev;
> + void __iomem *base;
> + const struct qcom_aoss_desc *desc;
> +};
> +
> +static const struct qcom_aoss_reset_map sdm845_aoss_resets[] = {
> + [AOSS_CC_MSS_RESTART] = {0x0},
> + [AOSS_CC_CAMSS_RESTART] = {0x1000},
> + [AOSS_CC_VENUS_RESTART] = {0x2000},
> + [AOSS_CC_GPU_RESTART] = {0x3000},
> + [AOSS_CC_DISPSS_RESTART] = {0x4000},
> + [AOSS_CC_WCSS_RESTART] = {0x10000},
> + [AOSS_CC_LPASS_RESTART] = {0x20000},
> +};
> +
> +static const struct qcom_aoss_desc sdm845_aoss_desc = {
> + .resets = sdm845_aoss_resets,
> + .num_resets = ARRAY_SIZE(sdm845_aoss_resets),
> +};
> +
> +static inline struct qcom_aoss_reset_data *to_qcom_aoss_reset_data(
> + struct reset_controller_dev *rcdev)
> +{
> + return container_of(rcdev, struct qcom_aoss_reset_data, rcdev);
> +}
> +
> +static int qcom_aoss_control_assert(struct reset_controller_dev *rcdev,
> + unsigned long idx)
> +{
> + struct qcom_aoss_reset_data *data = to_qcom_aoss_reset_data(rcdev);
> + const struct qcom_aoss_reset_map *map = &data->desc->resets[idx];
> +
> + writel(1, data->base + map->reg);
> + /* Wait 6 32kHz sleep cycles for reset */
> + usleep_range(200, 210);
> + return 0;
> +}
> +
> +static int qcom_aoss_control_deassert(struct reset_controller_dev *rcdev,
> + unsigned long idx)
> +{
> + struct qcom_aoss_reset_data *data = to_qcom_aoss_reset_data(rcdev);
> + const struct qcom_aoss_reset_map *map = &data->desc->resets[idx];
> +
> + writel(0, data->base + map->reg);
> + /* Wait 6 32kHz sleep cycles for reset */
> + usleep_range(200, 210);
6 32 kHz cycles are about 188 µs (184 µs for 32.768 kHz).
Just out of curiosity, is the minimum increased to 200 µs on purpose, or
to have a nice round number? The maximum seems oddly small, unless it is
essential to wait less than 7 cycles.
The driver looks good to me now. I plan to apply patches 1 and 2 with
Rob's ack.
Is it ok to merge them independently from the remoteproc driver, or is
there a dependency?
regards
Philipp
