On Thu, Apr 26, 2018 at 05:12:33PM +0800, Baolin Wang wrote: > From: Xiaotong Lu <xiaotong...@spreadtrum.com> > > This patch adds the binding documentation for Spreadtrum SC27xx series > vibrator device. > > Signed-off-by: Xiaotong Lu <xiaotong...@spreadtrum.com> > Signed-off-by: Baolin Wang <baolin.w...@linaro.org> > --- > Changes since v2: > - No updates. > > Changes since v1: > - No updates. > --- > .../bindings/input/sprd,sc27xx-vibra.txt | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt > > diff --git a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt > b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt > new file mode 100644 > index 0000000..92ead29 > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt > @@ -0,0 +1,12 @@ > +Spreadtrum SC27xx PMIC Vibrator > + > +Required properties: > +- compatible: should be "sprd,sc27xx-vibrator". > +- reg: address of vibrator control register. > + > +Example : > + > +vibrator@eb4 { > + compatible = "sprd,sc27xx-vibrator"; > + reg = <0xeb4>;
What bus is this on? A mmio bus needs a length. Is this part of some other block? Rob