Poifect (for earlier kernels without the restart adapter function added) Sincerely -- Mark Salyzyn
> -----Original Message----- > From: Chris Wright [mailto:[EMAIL PROTECTED] > Sent: Friday, June 08, 2007 2:41 PM > To: Salyzyn, Mark > Cc: Chris Wright; Stefan Lippers-Hollmann; James Bottomley; > AACRAID; Greg Kroah-Hartman; linux-kernel@vger.kernel.org; > [EMAIL PROTECTED]; [EMAIL PROTECTED] > Subject: Re: [stable] [patch 37/54] SCSI: aacraid: > Correctsaplatformsupport. (Was: [Bug 8469] Bad EIP value > onpentium3SMPkernel-2.6.21.1) > > > * Salyzyn, Mark ([EMAIL PROTECTED]) wrote: > > Drop the setting of restart, drop the dummy restart handler in sa.c. > > Yup, OK. That's exactly the updated patch I included. Here > it is again: > > From: Salyzyn, Mark <[EMAIL PROTECTED]> > Subject: SCSI: aacraid: Correct sa platform support. (Was: > [Bug 8469] Bad EIP value on pentium3 SMP kernel-2.6.21.1) > > > http://bugzilla.kernel.org/show_bug.cgi?id=8469 > > As discussed in the bugzilla outlined below, we have an sa based > (Mustang) RAID adapter on the system, a Dell PERC2/QC. Affected > controllers are HP NetRAID, Adaptec AAC-364, Dell PERC2/QC or Adaptec > 5400S. This problem coincides with the introduction of the > adapter_comm > and adapter_deliver platform functions (Message [PATCH 1/4] aacraid: > rework communication support code, January 23 2007, which initially > migrated to 2.6.21) > > The panic occurs with an uninitialized adapter_deliver > platform function > pointer. The enclosed patch, unmodified as tested by Rainer, > solves the > problem. > > Signed-off-by: Mark Salyzyn <[EMAIL PROTECTED]> > Signed-off-by: James Bottomley <[EMAIL PROTECTED]> > Signed-off-by: Greg Kroah-Hartman <[EMAIL PROTECTED]> > [chrisw: backport to 2.6.21.4] > Signed-off-by: Chris Wright <[EMAIL PROTECTED]> > > --- > drivers/scsi/aacraid/aacraid.h | 1 + > drivers/scsi/aacraid/rx.c | 2 +- > drivers/scsi/aacraid/sa.c | 3 ++- > 3 files changed, 4 insertions(+), 2 deletions(-) > > --- linux-2.6.21.4.orig/drivers/scsi/aacraid/aacraid.h > +++ linux-2.6.21.4/drivers/scsi/aacraid/aacraid.h > @@ -1840,6 +1840,7 @@ struct aac_driver_ident* aac_get_driver_ > int aac_get_adapter_info(struct aac_dev* dev); > int aac_send_shutdown(struct aac_dev *dev); > int aac_probe_container(struct aac_dev *dev, int cid); > +int aac_rx_deliver_producer(struct fib * fib); > extern int numacb; > extern int acbsize; > extern char aac_driver_version[]; > --- linux-2.6.21.4.orig/drivers/scsi/aacraid/rx.c > +++ linux-2.6.21.4/drivers/scsi/aacraid/rx.c > @@ -378,7 +378,7 @@ static int aac_rx_check_health(struct aa > * > * Will send a fib, returning 0 if successful. > */ > -static int aac_rx_deliver_producer(struct fib * fib) > +int aac_rx_deliver_producer(struct fib * fib) > { > struct aac_dev *dev = fib->dev; > struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue]; > --- linux-2.6.21.4.orig/drivers/scsi/aacraid/sa.c > +++ linux-2.6.21.4/drivers/scsi/aacraid/sa.c > @@ -5,7 +5,7 @@ > * based on the old aacraid driver that is.. > * Adaptec aacraid device driver for Linux. > * > - * Copyright (c) 2000 Adaptec, Inc. ([EMAIL PROTECTED]) > + * Copyright (c) 2000-2007 Adaptec, Inc. ([EMAIL PROTECTED]) > * > * This program is free software; you can redistribute it > and/or modify > * it under the terms of the GNU General Public License as > published by > @@ -368,6 +368,7 @@ int aac_sa_init(struct aac_dev *dev) > dev->a_ops.adapter_sync_cmd = sa_sync_cmd; > dev->a_ops.adapter_check_health = aac_sa_check_health; > dev->a_ops.adapter_intr = aac_sa_intr; > + dev->a_ops.adapter_deliver = aac_rx_deliver_producer; > dev->a_ops.adapter_ioremap = aac_sa_ioremap; > > /* > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
