Grant Grundler wrote:
On Fri, Jun 08, 2007 at 03:46:30PM -0700, Auke Kok wrote:
Currently there are 97 occurrences where drivers need the pci
revision ID. We can do this once for all devices. Even the pci
subsystem needs the revision several times for quirks. The extra
u8 member pads out nicely in the pci_dev struct.
Good idea. I always wondered why we read the invariants so often
in the code.
Signed-off-by: Auke Kok <[EMAIL PROTECTED]>
---
drivers/pci/probe.c | 3 +++
include/linux/pci.h | 1 +
2 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index e48fcf0..0fdb71d 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -918,6 +918,9 @@ pci_scan_device(struct pci_bus *bus, int devfn)
dev->cfg_size = pci_cfg_space_size(dev);
dev->error_state = pci_channel_io_normal;
+ /* read the PCI revision: 1 byte */
+ pci_read_config_byte(dev, PCI_REVISION_ID, &dev->revision);
probe.c:pci_setup_device() is also reading this byte but discards it:
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
class >>= 8; /* upper 3 bytes */
dev->class = class;
Can you use "class & 0xff"? Or is pci_setup_device() too late?
Or can you read the whole 32-bits in pci_scan_device() and remove
the pci_read_config() in pci_setup_device()?
no, pci_setup_device() is just called right after the location where I read the
REVISION_ID. I'll remove the read and put the dev->revision right after where we
read the class dword.
Auke
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
