Hi Hans,
On Mon, 2018-05-07 at 14:07 +0200, Hans Verkuil wrote:
> On 04/05/18 22:06, Ezequiel Garcia wrote:
> > From: Gustavo Padovan <gustavo.pado...@collabora.com>
> >
> > Receive in-fence from userspace and add support for waiting on them
> > before queueing the buffer to the driver. Buffers can't be queued
> > to the
> > driver before its fences signal. And a buffer can't be queued to
> > the driver
> > out of the order they were queued from userspace. That means that
> > even if
> > its fence signals it must wait for all other buffers, ahead of it
> > in the queue,
> > to signal first.
> >
> > If the fence for some buffer fails we do not queue it to the
> > driver,
> > instead we mark it as error and wait until the previous buffer is
> > done
> > to notify userspace of the error. We wait here to deliver the
> > buffers back
> > to userspace in order.
> >
> > v12: fixed dvb_vb2.c usage of vb2_core_qbuf.
> >
> > v11: - minor doc/comments fixes (Hans Verkuil)
> > - reviewed the in-fence path at __fill_v4l2_buffer()
> >
> > v10: - rename fence to in_fence in many places
> > - handle fences signalling with error better (Hans Verkuil)
> >
> > v9: - improve comments and docs (Hans Verkuil)
> > - fix unlocking of vb->fence_cb_lock on vb2_core_qbuf (Hans
> > Verkuil)
> > - move in-fences code that was in the out-fences patch here
> > (Alex)
> >
> > v8: - improve comments about fences with errors
> >
> > v7: - get rid of the fence array stuff for ordering and just use
> > get_num_buffers_ready() (Hans)
> > - fix issue of queuing the buffer twice (Hans)
> > - avoid the dma_fence_wait() in core_qbuf() (Alex)
> > - merge preparation commit in
> >
> > v6: - With fences always keep the order userspace queues the
> > buffers.
> > - Protect in_fence manipulation with a lock (Brian Starkey)
> > - check if fences have the same context before adding a fence
> > array
> > - Fix last_fence ref unbalance in __set_in_fence() (Brian
> > Starkey)
> > - Clean up fence if __set_in_fence() fails (Brian Starkey)
> > - treat -EINVAL from dma_fence_add_callback() (Brian Starkey)
> >
> > v5: - use fence_array to keep buffers ordered in vb2 core when
> > needed (Brian Starkey)
> > - keep backward compat on the reserved2 field (Brian Starkey)
> > - protect fence callback removal with lock (Brian Starkey)
> >
> > v4: - Add a comment about dma_fence_add_callback() not returning a
> > error (Hans)
> > - Call dma_fence_put(vb->in_fence) if fence signaled (Hans)
> > - select SYNC_FILE under config VIDEOBUF2_CORE (Hans)
> > - Move dma_fence_is_signaled() check to __enqueue_in_driver()
> > (Hans)
> > - Remove list_for_each_entry() in __vb2_core_qbuf() (Hans)
> > - Remove if (vb->state != VB2_BUF_STATE_QUEUED) from
> > vb2_start_streaming() (Hans)
> > - set IN_FENCE flags on __fill_v4l2_buffer (Hans)
> > - Queue buffers to the driver as soon as they are ready (Hans)
> > - call fill_user_buffer() after queuing the buffer (Hans)
> > - add err: label to clean up fence
> > - add dma_fence_wait() before calling vb2_start_streaming()
> >
> > v3: - document fence parameter
> > - remove ternary if at vb2_qbuf() return (Mauro)
> > - do not change if conditions behaviour (Mauro)
> >
> > v2: - fix vb2_queue_or_prepare_buf() ret check
> > - remove check for VB2_MEMORY_DMABUF only (Javier)
> > - check num of ready buffers to start streaming
> > - when queueing, start from the first ready buffer
> > - handle queue cancel
> >
> > Signed-off-by: Gustavo Padovan <gustavo.pado...@collabora.com>
> > Signed-off-by: Ezequiel Garcia <ezequ...@collabora.com>
> > ---
> > drivers/media/common/videobuf2/videobuf2-core.c | 197
> > ++++++++++++++++++++----
> > drivers/media/common/videobuf2/videobuf2-v4l2.c | 34 +++-
> > drivers/media/dvb-core/dvb_vb2.c | 2 +-
> > drivers/media/v4l2-core/Kconfig | 33 ++++
> > include/media/videobuf2-core.h | 14 +-
> > 5 files changed, 249 insertions(+), 31 deletions(-)
> >
> > diff --git a/drivers/media/common/videobuf2/videobuf2-core.c
> > b/drivers/media/common/videobuf2/videobuf2-core.c
> > index 6b8e083893ad..996b99497a98 100644
> > --- a/drivers/media/common/videobuf2/videobuf2-core.c
> > +++ b/drivers/media/common/videobuf2/videobuf2-core.c
> > @@ -352,6 +352,7 @@ static int __vb2_queue_alloc(struct vb2_queue
> > *q, enum vb2_memory memory,
> > vb->index = q->num_buffers + buffer;
> > vb->type = q->type;
> > vb->memory = memory;
> > + spin_lock_init(&vb->fence_cb_lock);
> > for (plane = 0; plane < num_planes; ++plane) {
> > vb->planes[plane].length =
> > plane_sizes[plane];
> > vb->planes[plane].min_length =
> > plane_sizes[plane];
> > @@ -905,20 +906,12 @@ void *vb2_plane_cookie(struct vb2_buffer *vb,
> > unsigned int plane_no)
> > }
> > EXPORT_SYMBOL_GPL(vb2_plane_cookie);
> >
> > -void vb2_buffer_done(struct vb2_buffer *vb, enum vb2_buffer_state
> > state)
> > +static void vb2_process_buffer_done(struct vb2_buffer *vb, enum
> > vb2_buffer_state state)
> > {
> > struct vb2_queue *q = vb->vb2_queue;
> > unsigned long flags;
> > unsigned int plane;
> >
> > - if (WARN_ON(vb->state != VB2_BUF_STATE_ACTIVE))
> > - return;
> > -
> > - if (WARN_ON(state != VB2_BUF_STATE_DONE &&
> > - state != VB2_BUF_STATE_ERROR &&
> > - state != VB2_BUF_STATE_QUEUED &&
> > - state != VB2_BUF_STATE_REQUEUEING))
> > - state = VB2_BUF_STATE_ERROR;
> >
> > #ifdef CONFIG_VIDEO_ADV_DEBUG
> > /*
> > @@ -935,6 +928,9 @@ void vb2_buffer_done(struct vb2_buffer *vb,
> > enum vb2_buffer_state state)
> > call_void_memop(vb, finish, vb-
> > >planes[plane].mem_priv);
> >
> > spin_lock_irqsave(&q->done_lock, flags);
> > + if (vb->state == VB2_BUF_STATE_ACTIVE)
> > + atomic_dec(&q->owned_by_drv_count);
> > +
> > if (state == VB2_BUF_STATE_QUEUED ||
> > state == VB2_BUF_STATE_REQUEUEING) {
> > vb->state = VB2_BUF_STATE_QUEUED;
> > @@ -943,7 +939,7 @@ void vb2_buffer_done(struct vb2_buffer *vb,
> > enum vb2_buffer_state state)
> > list_add_tail(&vb->done_entry, &q->done_list);
> > vb->state = state;
> > }
> > - atomic_dec(&q->owned_by_drv_count);
> > +
> > spin_unlock_irqrestore(&q->done_lock, flags);
> >
> > trace_vb2_buf_done(q, vb);
> > @@ -960,6 +956,36 @@ void vb2_buffer_done(struct vb2_buffer *vb,
> > enum vb2_buffer_state state)
> > wake_up(&q->done_wq);
> > break;
> > }
> > +
> > +}
> > +
> > +void vb2_buffer_done(struct vb2_buffer *vb, enum vb2_buffer_state
> > state)
> > +{
> > + if (WARN_ON(vb->state != VB2_BUF_STATE_ACTIVE))
> > + return;
> > +
> > + if (WARN_ON(state != VB2_BUF_STATE_DONE &&
> > + state != VB2_BUF_STATE_ERROR &&
> > + state != VB2_BUF_STATE_QUEUED &&
> > + state != VB2_BUF_STATE_REQUEUEING))
> > + state = VB2_BUF_STATE_ERROR;
> > +
> > + vb2_process_buffer_done(vb, state);
> > +
> > + /*
> > + * Check if there is any buffer with error in the next
> > position of the queue,
> > + * buffers whose in-fence signaled with error are not
> > queued to the driver
> > + * and kept on the queue until the buffer before them is
> > done, so to not
> > + * deliver buffers back to userspace in the wrong order.
> > Here we process
> > + * any existing buffers with errors and wake up userspace.
> > + */
> > + for (;;) {
>
> I think this should test if the list is empty before calling
> list_next_entry().
>
> > + vb = list_next_entry(vb, queued_entry);
> > + if (!vb || vb->state != VB2_BUF_STATE_ERROR)
>
> The !vb check makes no sense. list_next_entry won't return NULL if
> there is no
> next entry, you need to call list_empty() first.
>
> > + break;
> > +
> > + vb2_process_buffer_done(vb, VB2_BUF_STATE_ERROR);
> > + }
> > }
> > EXPORT_SYMBOL_GPL(vb2_buffer_done);
> >
> > @@ -1244,6 +1270,9 @@ static void __enqueue_in_driver(struct
> > vb2_buffer *vb)
> > {
> > struct vb2_queue *q = vb->vb2_queue;
> >
> > + if (vb->in_fence && !dma_fence_is_signaled(vb->in_fence))
> > + return;
> > +
> > vb->state = VB2_BUF_STATE_ACTIVE;
> > atomic_inc(&q->owned_by_drv_count);
> >
> > @@ -1295,6 +1324,24 @@ static int __buf_prepare(struct vb2_buffer
> > *vb, const void *pb)
> > return 0;
> > }
> >
> > +static int __get_num_ready_buffers(struct vb2_queue *q)
> > +{
> > + struct vb2_buffer *vb;
> > + int ready_count = 0;
> > + unsigned long flags;
> > +
> > + /* count num of buffers ready in front of the queued_list
> > */
> > + list_for_each_entry(vb, &q->queued_list, queued_entry) {
> > + spin_lock_irqsave(&vb->fence_cb_lock, flags);
> > + if (vb->in_fence && !dma_fence_is_signaled(vb-
> > >in_fence))
> > + break;
> > + ready_count++;
> > + spin_unlock_irqrestore(&vb->fence_cb_lock, flags);
> > + }
> > +
> > + return ready_count;
> > +}
> > +
> > int vb2_core_prepare_buf(struct vb2_queue *q, unsigned int index,
> > void *pb)
> > {
> > struct vb2_buffer *vb;
> > @@ -1383,9 +1430,43 @@ static int vb2_start_streaming(struct
> > vb2_queue *q)
> > return ret;
> > }
> >
> > -int vb2_core_qbuf(struct vb2_queue *q, unsigned int index, void
> > *pb)
> > +static void vb2_qbuf_fence_cb(struct dma_fence *f, struct
> > dma_fence_cb *cb)
> > +{
> > + struct vb2_buffer *vb = container_of(cb, struct
> > vb2_buffer, fence_cb);
> > + struct vb2_queue *q = vb->vb2_queue;
> > + unsigned long flags;
> > +
> > + spin_lock_irqsave(&vb->fence_cb_lock, flags);
> > + /*
> > + * If the fence signals with an error we mark the buffer
> > as such
> > + * and avoid using it by setting it to VB2_BUF_STATE_ERROR
> > and
> > + * not queueing it to the driver. However we can't notify
> > the error
> > + * to userspace right now because, at the time this
> > callback run, QBUF
> > + * has returned already.
> > + * So we delay that to DQBUF time. See comments in
> > vb2_buffer_done()
> > + * as well.
> > + */
> > + if (vb->in_fence->error)
> > + vb->state = VB2_BUF_STATE_ERROR;
> > +
> > + dma_fence_put(vb->in_fence);
> > + vb->in_fence = NULL;
> > +
> > + if (vb->state == VB2_BUF_STATE_ERROR) {
> > + spin_unlock_irqrestore(&vb->fence_cb_lock, flags);
> > + return;
> > + }
> > +
> > + if (q->start_streaming_called)
>
> I'd change this to:
>
> if (q->start_streaming_called &&
> vb->state != VB2_BUF_STATE_ERROR)
>
> Then you can drop the previous 'if'.
>
> > + __enqueue_in_driver(vb);
> > + spin_unlock_irqrestore(&vb->fence_cb_lock, flags);
> > +}
> > +
> > +int vb2_core_qbuf(struct vb2_queue *q, unsigned int index, void
> > *pb,
> > + struct dma_fence *in_fence)
> > {
> > struct vb2_buffer *vb;
> > + unsigned long flags;
> > int ret;
> >
> > vb = q->bufs[index];
> > @@ -1394,16 +1475,18 @@ int vb2_core_qbuf(struct vb2_queue *q,
> > unsigned int index, void *pb)
> > case VB2_BUF_STATE_DEQUEUED:
> > ret = __buf_prepare(vb, pb);
> > if (ret)
> > - return ret;
> > + goto err;
> > break;
> > case VB2_BUF_STATE_PREPARED:
> > break;
> > case VB2_BUF_STATE_PREPARING:
> > dprintk(1, "buffer still being prepared\n");
> > - return -EINVAL;
> > + ret = -EINVAL;
> > + goto err;
> > default:
> > dprintk(1, "invalid buffer state %d\n", vb-
> > >state);
> > - return -EINVAL;
> > + ret = -EINVAL;
> > + goto err;
> > }
> >
> > /*
> > @@ -1414,6 +1497,7 @@ int vb2_core_qbuf(struct vb2_queue *q,
> > unsigned int index, void *pb)
> > q->queued_count++;
> > q->waiting_for_buffers = false;
> > vb->state = VB2_BUF_STATE_QUEUED;
> > + vb->in_fence = in_fence;
> >
> > if (pb)
> > call_void_bufop(q, copy_timestamp, vb, pb);
> > @@ -1421,15 +1505,40 @@ int vb2_core_qbuf(struct vb2_queue *q,
> > unsigned int index, void *pb)
> > trace_vb2_qbuf(q, vb);
> >
> > /*
> > - * If already streaming, give the buffer to driver for
> > processing.
> > - * If not, the buffer will be given to driver on next
> > streamon.
> > + * For explicit synchronization: If the fence didn't
> > signal
> > + * yet we setup a callback to queue the buffer once the
> > fence
> > + * signals and then return successfully. But if the fence
> > + * already signaled we lose the reference we held and
> > queue the
> > + * buffer to the driver.
>
> What happens if the fence signaled an error? Is that error returned
> to userspace?
> (i.e. VIDIOC_QBUF will fail in that case)
>
> > */
> > - if (q->start_streaming_called)
> > - __enqueue_in_driver(vb);
> > + spin_lock_irqsave(&vb->fence_cb_lock, flags);
> > + if (vb->in_fence) {
> > + ret = dma_fence_add_callback(vb->in_fence, &vb-
> > >fence_cb,
> > + vb2_qbuf_fence_cb);
> > + /* is the fence signaled? */
> > + if (ret == -ENOENT) {
> > + dma_fence_put(vb->in_fence);
> > + vb->in_fence = NULL;
> > + } else if (ret) {
> > + goto unlock;
> > + }
> > + }
> >
> > - /* Fill buffer information for the userspace */
> > - if (pb)
> > - call_void_bufop(q, fill_user_buffer, vb, pb);
> > + /*
> > + * If already streaming and there is no fence to wait on
> > + * give the buffer to driver for processing.
> > + */
> > + if (q->start_streaming_called) {
> > + struct vb2_buffer *b;
> > +
> > + list_for_each_entry(b, &q->queued_list,
> > queued_entry) {
> > + if (b->state != VB2_BUF_STATE_QUEUED)
> > + continue;
> > + if (b->in_fence)
> > + break;
> > + __enqueue_in_driver(b);
> > + }
> > + }
> >
> > /*
> > * If streamon has been called, and we haven't yet called
> > @@ -1438,14 +1547,36 @@ int vb2_core_qbuf(struct vb2_queue *q,
> > unsigned int index, void *pb)
> > * then we can finally call start_streaming().
> > */
> > if (q->streaming && !q->start_streaming_called &&
> > - q->queued_count >= q->min_buffers_needed) {
> > + __get_num_ready_buffers(q) >= q->min_buffers_needed) {
> > ret = vb2_start_streaming(q);
> > if (ret)
> > - return ret;
> > + goto unlock;
> > }
> >
> > + spin_unlock_irqrestore(&vb->fence_cb_lock, flags);
> > +
> > + /* Fill buffer information for the userspace */
>
> s/the//
>
> > + if (pb)
> > + call_void_bufop(q, fill_user_buffer, vb, pb);
> > +
> > dprintk(2, "qbuf of buffer %d succeeded\n", vb->index);
> > return 0;
> > +
> > +unlock:
> > + spin_unlock_irqrestore(&vb->fence_cb_lock, flags);
> > +
> > +err:
> > + /* Fill buffer information for the userspace */
>
> s/the//
>
> > + if (pb)
> > + call_void_bufop(q, fill_user_buffer, vb, pb);
> > +
> > + if (vb->in_fence) {
> > + dma_fence_put(vb->in_fence);
> > + vb->in_fence = NULL;
> > + }
> > +
> > + return ret;
> > +
> > }
> > EXPORT_SYMBOL_GPL(vb2_core_qbuf);
> >
> > @@ -1656,6 +1787,8 @@ EXPORT_SYMBOL_GPL(vb2_core_dqbuf);
> > static void __vb2_queue_cancel(struct vb2_queue *q)
> > {
> > unsigned int i;
> > + struct vb2_buffer *vb;
> > + unsigned long flags;
> >
> > /*
> > * Tell driver to stop all transactions and release all
> > queued
> > @@ -1686,6 +1819,16 @@ static void __vb2_queue_cancel(struct
> > vb2_queue *q)
> > q->queued_count = 0;
> > q->error = 0;
> >
> > + list_for_each_entry(vb, &q->queued_list, queued_entry) {
> > + spin_lock_irqsave(&vb->fence_cb_lock, flags);
> > + if (vb->in_fence) {
> > + dma_fence_remove_callback(vb->in_fence,
> > &vb->fence_cb);
> > + dma_fence_put(vb->in_fence);
> > + vb->in_fence = NULL;
> > + }
> > + spin_unlock_irqrestore(&vb->fence_cb_lock, flags);
> > + }
> > +
> > /*
> > * Remove all buffers from videobuf's list...
> > */
> > @@ -1756,7 +1899,7 @@ int vb2_core_streamon(struct vb2_queue *q,
> > unsigned int type)
> > * Tell driver to start streaming provided sufficient
> > buffers
> > * are available.
> > */
> > - if (q->queued_count >= q->min_buffers_needed) {
> > + if (__get_num_ready_buffers(q) >= q->min_buffers_needed) {
> > ret = v4l_vb2q_enable_media_source(q);
> > if (ret)
> > return ret;
> > @@ -2278,7 +2421,7 @@ static int __vb2_init_fileio(struct vb2_queue
> > *q, int read)
> > * Queue all buffers.
> > */
> > for (i = 0; i < q->num_buffers; i++) {
> > - ret = vb2_core_qbuf(q, i, NULL);
> > + ret = vb2_core_qbuf(q, i, NULL, NULL);
> > if (ret)
> > goto err_reqbufs;
> > fileio->bufs[i].queued = 1;
> > @@ -2457,7 +2600,7 @@ static size_t __vb2_perform_fileio(struct
> > vb2_queue *q, char __user *data, size_
> >
> > if (copy_timestamp)
> > b->timestamp = ktime_get_ns();
> > - ret = vb2_core_qbuf(q, index, NULL);
> > + ret = vb2_core_qbuf(q, index, NULL, NULL);
> > dprintk(5, "vb2_dbuf result: %d\n", ret);
> > if (ret)
> > return ret;
> > @@ -2560,7 +2703,7 @@ static int vb2_thread(void *data)
> > if (copy_timestamp)
> > vb->timestamp = ktime_get_ns();
> > if (!threadio->stop)
> > - ret = vb2_core_qbuf(q, vb->index, NULL);
> > + ret = vb2_core_qbuf(q, vb->index, NULL,
> > NULL);
> > call_void_qop(q, wait_prepare, q);
> > if (ret || threadio->stop)
> > break;
> > diff --git a/drivers/media/common/videobuf2/videobuf2-v4l2.c
> > b/drivers/media/common/videobuf2/videobuf2-v4l2.c
> > index b1c0fa2b0b88..74d7062e5285 100644
> > --- a/drivers/media/common/videobuf2/videobuf2-v4l2.c
> > +++ b/drivers/media/common/videobuf2/videobuf2-v4l2.c
> > @@ -23,6 +23,7 @@
> > #include <linux/sched.h>
> > #include <linux/freezer.h>
> > #include <linux/kthread.h>
> > +#include <linux/sync_file.h>
> >
> > #include <media/v4l2-dev.h>
> > #include <media/v4l2-fh.h>
> > @@ -178,6 +179,17 @@ static int vb2_queue_or_prepare_buf(struct
> > vb2_queue *q, struct v4l2_buffer *b,
> > return -EINVAL;
> > }
> >
> > + if ((b->fence_fd != 0 && b->fence_fd != -1) &&
> > + !(b->flags & V4L2_BUF_FLAG_IN_FENCE)) {
> > + dprintk(1, "%s: fence_fd set without IN_FENCE
> > flag\n", opname);
> > + return -EINVAL;
> > + }
> > +
> > + if (b->fence_fd < 0 && (b->flags &
> > V4L2_BUF_FLAG_IN_FENCE)) {
> > + dprintk(1, "%s: IN_FENCE flag set but no
> > fence_fd\n", opname);
> > + return -EINVAL;
> > + }
> > +
> > return __verify_planes_array(q->bufs[b->index], b);
> > }
> >
> > @@ -203,9 +215,14 @@ static void __fill_v4l2_buffer(struct
> > vb2_buffer *vb, void *pb)
> > b->timestamp = ns_to_timeval(vb->timestamp);
> > b->timecode = vbuf->timecode;
> > b->sequence = vbuf->sequence;
> > - b->fence_fd = 0;
> > b->reserved = 0;
> >
> > + b->fence_fd = 0;
> > + if (vb->in_fence)
> > + b->flags |= V4L2_BUF_FLAG_IN_FENCE;
> > + else
> > + b->flags &= ~V4L2_BUF_FLAG_IN_FENCE;
> > +
> > if (q->is_multiplanar) {
> > /*
> > * Fill in plane-related data if userspace
> > provided an array
> > @@ -562,6 +579,7 @@ EXPORT_SYMBOL_GPL(vb2_create_bufs);
> >
> > int vb2_qbuf(struct vb2_queue *q, struct v4l2_buffer *b)
> > {
> > + struct dma_fence *in_fence = NULL;
> > int ret;
> >
> > if (vb2_fileio_is_active(q)) {
> > @@ -570,7 +588,19 @@ int vb2_qbuf(struct vb2_queue *q, struct
> > v4l2_buffer *b)
> > }
> >
> > ret = vb2_queue_or_prepare_buf(q, b, "qbuf");
> > - return ret ? ret : vb2_core_qbuf(q, b->index, b);
> > + if (ret)
> > + return ret;
> > +
> > + if (b->flags & V4L2_BUF_FLAG_IN_FENCE) {
> > + in_fence = sync_file_get_fence(b->fence_fd);
> > + if (!in_fence) {
> > + dprintk(1, "failed to get in-fence from fd
> > %d\n",
> > + b->fence_fd);
> > + return -EINVAL;
> > + }
> > + }
> > +
> > + return vb2_core_qbuf(q, b->index, b, in_fence);
> > }
> > EXPORT_SYMBOL_GPL(vb2_qbuf);
> >
> > diff --git a/drivers/media/dvb-core/dvb_vb2.c b/drivers/media/dvb-
> > core/dvb_vb2.c
> > index b811adf88afa..7da53f10db1a 100644
> > --- a/drivers/media/dvb-core/dvb_vb2.c
> > +++ b/drivers/media/dvb-core/dvb_vb2.c
> > @@ -385,7 +385,7 @@ int dvb_vb2_qbuf(struct dvb_vb2_ctx *ctx,
> > struct dmx_buffer *b)
> > {
> > int ret;
> >
> > - ret = vb2_core_qbuf(&ctx->vb_q, b->index, b);
> > + ret = vb2_core_qbuf(&ctx->vb_q, b->index, b, NULL);
> > if (ret) {
> > dprintk(1, "[%s] index=%d errno=%d\n", ctx->name,
> > b->index, ret);
> > diff --git a/drivers/media/v4l2-core/Kconfig b/drivers/media/v4l2-
> > core/Kconfig
> > index 8e37e7c5e0f7..79dfb5dfd1fc 100644
> > --- a/drivers/media/v4l2-core/Kconfig
> > +++ b/drivers/media/v4l2-core/Kconfig
> > @@ -80,3 +80,36 @@ config VIDEOBUF_DMA_CONTIG
> > config VIDEOBUF_DVB
> > tristate
> > select VIDEOBUF_GEN
> > +
> > +# Used by drivers that need Videobuf2 modules
> > +config VIDEOBUF2_CORE
> > + select DMA_SHARED_BUFFER
> > + select SYNC_FILE
> > + tristate
> > +
> > +config VIDEOBUF2_MEMOPS
> > + tristate
> > + select FRAME_VECTOR
> > +
> > +config VIDEOBUF2_DMA_CONTIG
> > + tristate
> > + depends on HAS_DMA
> > + select VIDEOBUF2_CORE
> > + select VIDEOBUF2_MEMOPS
> > + select DMA_SHARED_BUFFER
> > +
> > +config VIDEOBUF2_VMALLOC
> > + tristate
> > + select VIDEOBUF2_CORE
> > + select VIDEOBUF2_MEMOPS
> > + select DMA_SHARED_BUFFER
> > +
> > +config VIDEOBUF2_DMA_SG
> > + tristate
> > + depends on HAS_DMA
> > + select VIDEOBUF2_CORE
> > + select VIDEOBUF2_MEMOPS
> > +
> > +config VIDEOBUF2_DVB
> > + tristate
> > + select VIDEOBUF2_CORE
>
> This chunk doesn't really belong here. Should be a separate patch
> with an explanation
> why.
>
> > diff --git a/include/media/videobuf2-core.h
> > b/include/media/videobuf2-core.h
> > index 364e4cb41b10..28ce8f66882e 100644
> > --- a/include/media/videobuf2-core.h
> > +++ b/include/media/videobuf2-core.h
> > @@ -17,6 +17,7 @@
> > #include <linux/poll.h>
> > #include <linux/dma-buf.h>
> > #include <linux/bitops.h>
> > +#include <linux/dma-fence.h>
> >
> > #define VB2_MAX_FRAME (32)
> > #define VB2_MAX_PLANES (8)
> > @@ -255,12 +256,21 @@ struct vb2_buffer {
> > * done_entry: entry on the list that
> > stores all buffers ready
> > * to be dequeued to userspace
> > * vb2_plane: per-plane information; do not
> > change
> > + * in_fence: fence received from vb2 client
> > to wait on before
> > + * using the buffer (queueing to
> > the driver)
> > + * fence_cb: fence callback information
> > + * fence_cb_lock: protect callback signal/remove
> > */
> > enum vb2_buffer_state state;
> >
> > struct vb2_plane planes[VB2_MAX_PLANES];
> > struct list_head queued_entry;
> > struct list_head done_entry;
> > +
> > + struct dma_fence *in_fence;
> > + struct dma_fence_cb fence_cb;
> > + spinlock_t fence_cb_lock;
> > +
>
> So for the _MPLANE formats this is one fence for all planes. Which
> makes sense, but how
> does drm handle that? Also one fence for all planes?
Yes, this is one fence for all planes.
The DRM concept for planes is a totally different concept and is
basically a representation of an user definable square on the screen,
and to that plane there in one framebuffer attached - display hw has no
such a multiplanar for the same image AFAICT. So you probably need some
blit to convert the v4l2 multiplanar to a DRM framebuffer.
>
> I think there should be a comment about this somewhere.
Yes, we've been over this exact discussion a few times :)
Having entirely different things with the same name is quite confusing.
Regards,
Gustavo
--
Gustavo Padovan
Principal Software Engineer
Collabora Ltd.
