[PATCH 13/21] i2c: kempld: make use of i2c_8bit_addr_from_msg

[Peter Rosin]

Because it looks neater.

Signed-off-by: Peter Rosin <p...@axentia.se>
---
 drivers/i2c/busses/i2c-kempld.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-kempld.c b/drivers/i2c/busses/i2c-kempld.c
index e879190b5d1d..1c874aaa0447 100644
--- a/drivers/i2c/busses/i2c-kempld.c
+++ b/drivers/i2c/busses/i2c-kempld.c
@@ -124,15 +124,14 @@ static int kempld_i2c_process(struct kempld_i2c_data *i2c)
                /* 10 bit address? */
                if (i2c->msg->flags & I2C_M_TEN) {
                        addr = 0xf0 | ((i2c->msg->addr >> 7) & 0x6);
+                       /* Set read bit if necessary */
+                       addr |= (i2c->msg->flags & I2C_M_RD) ? 1 : 0;
                        i2c->state = STATE_ADDR10;
                } else {
-                       addr = (i2c->msg->addr << 1);
+                       addr = i2c_8bit_addr_from_msg(i2c->msg);
                        i2c->state = STATE_START;
                }
 
-               /* Set read bit if necessary */
-               addr |= (i2c->msg->flags & I2C_M_RD) ? 1 : 0;
-
                kempld_write8(pld, KEMPLD_I2C_DATA, addr);
                kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_START);
 
-- 
2.11.0