On 05/14/2018 09:20 AM, Oleksandr Shamray wrote:
Hi,
Just a bit more Kconfig fixing below.
> ---
> Documentation/ioctl/ioctl-number.txt | 2 +
> MAINTAINERS | 10 ++
> drivers/Kconfig | 2 +
> drivers/Makefile | 1 +
> drivers/jtag/Kconfig | 18 +++
> drivers/jtag/Makefile | 1 +
> drivers/jtag/jtag.c | 274
> ++++++++++++++++++++++++++++++++++
> include/linux/jtag.h | 41 +++++
> include/uapi/linux/jtag.h | 105 +++++++++++++
> 9 files changed, 454 insertions(+), 0 deletions(-)
> create mode 100644 drivers/jtag/Kconfig
> create mode 100644 drivers/jtag/Makefile
> create mode 100644 drivers/jtag/jtag.c
> create mode 100644 include/linux/jtag.h
> create mode 100644 include/uapi/linux/jtag.h
> diff --git a/drivers/jtag/Kconfig b/drivers/jtag/Kconfig
> new file mode 100644
> index 0000000..ba72a2b
> --- /dev/null
> +++ b/drivers/jtag/Kconfig
> @@ -0,0 +1,18 @@
> +menuconfig JTAG
> + tristate "JTAG support"
> + help
> + This provides basic core functionality support for JTAG class devices
(end sentence above with '.') devices.
> + Hardware that is equipped with a JTAG microcontroller can be
> + supported by using this driver's interfaces.
> + This driver exposes a set of IOCTL to the user space for
IOCTLs
> + another commands:
various commands:
or
the following commands:
or
associated commands:
> + SDR: (Scan Data Register) Performs an IEEE 1149.1 Data Register scan
> + SIR: (Scan Instruction Register) Performs an IEEE 1149.1 Instruction
> + Register scan.
> + RUNTEST: Forces the IEEE 1149.1 bus to a run state for a specified
> + number of clocks or a specified time period.
> +
> + If you want this support, you should say Y here.
> +
> + To compile this driver as a module, choose M here: the module will
> + be called jtag.
thanks,
--
~Randy
